DEMO9S08JM16 Freescale Semiconductor, DEMO9S08JM16 Datasheet - Page 182

• Manufacturer Part Number: DEMO9S08JM16
• Description: BOARD DEMO FOR JM16 FAMI
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S08JM16

• Contents: Board with Daughter card, Cable, Documentation, Mini-AB USB Kit
• Processor To Be Evaluated: MC9S08JM16
• Data Bus Width: 8 bit
• Interface Type: USB
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: Flexis - S08JM
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08JM16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Multi-Purpose Clock Generator (S08MCGV1)
12.3
12.3.1
182
IREFSTEN
IRCLKEN
IREFS
CLKS
Field
RDIV
7:6
5:3
2
1
0
Reset:
Register Definition
W
R
MCG Control Register 1 (MCGC1)
Clock Source Select — Selects the system clock source.
00
01
10
11
Reference Divider — Selects the amount to divide down the reference clock selected by the IREFS bit. If the
FLL is selected, the resulting frequency must be in the range 31.25 kHz to 39.0625 kHz. If the PLL is selected,
the resulting frequency must be in the range 1 MHz to 2 MHz.
000 Encoding 0 — Divides reference clock by 1 (reset default)
001 Encoding 1 — Divides reference clock by 2
010 Encoding 2 — Divides reference clock by 4
011 Encoding 3 — Divides reference clock by 8
100 Encoding 4 — Divides reference clock by 16
101 Encoding 5 — Divides reference clock by 32
110 Encoding 6 — Divides reference clock by 64
111 Encoding 7 — Divides reference clock by 128
Internal Reference Select — Selects the reference clock source.
1 Internal reference clock selected
0 External reference clock selected
Internal Reference Clock Enable — Enables the internal reference clock for use as MCGIRCLK.
1 MCGIRCLK active
0 MCGIRCLK inactive
Internal Reference Stop Enable — Controls whether or not the internal reference clock remains enabled when
the MCG enters stop mode.
1 Internal reference clock stays enabled in stop if IRCLKEN is set or if MCG is in FEI, FBI, or BLPI mode before
0 Internal reference clock is disabled in stop
entering stop
Encoding 0 — Output of FLL or PLL is selected.
Encoding 1 — Internal reference clock is selected.
Encoding 2 — External reference clock is selected.
Encoding 3 — Reserved, defaults to 00.
7
0
CLKS
Table 12-1. MCG Control Register 1 Field Descriptions
Figure 12-3. MCG Control Register 1 (MCGC1)
0
6
MC9S08JM16 Series Data Sheet, Rev. 2
0
5
RDIV
0
4
Description
0
3
IREFS
1
2
IRCLKEN
Freescale Semiconductor
0
1
IREFSTEN
0
0