DV007004 Microchip Technology, DV007004 Datasheet - Page 52

• Manufacturer Part Number: DV007004
• Description: PROGRAMMER UNIVERSAL PM3
• Manufacturer: Microchip Technology
• Series: MPLAB&reg PM3r
• Type: Universalr

Specifications of DV007004

• Contents: MPLAB PM3 Programming Unit, Cables, Power Supply and IDE
• Positions/sockets: 1
• Ic Product Type: Programmer, Universal
• Supported Families: PICmicro, DsPIC30F
• Kit Contents: LCD, ICSP Support, 40-pin Socket, Digital/Multimedia Card Slot
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Microchip's PICmicro devices including dsPIC30F
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: PICmicro And DsPIC30F DSC Devices
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

5.3
DS51464C-page 46
PROGRAMMING A DEVICE
®
After applying power to MPLAB PM3, the unit briefly displays the MPLAB PM3 splash
screen and versions screen. Then, MPLAB PM3 displays the Main menu.
FIGURE 5-1:
• Recently Used
• Select Device
• MPLAB PM3 Card (if inserted)
• Programmer Settings
• Help
5.3.1
Select “Recently Used” to retrieve the last device used in MPLAB PM3. This option dis-
plays the seven most recently used devices and enables quick access to the Command
menu for the device.
5.3.2
Select “Select Device” to indicate the device family and then, the device that is to be
programmed. After the device is selected, MPLAB PM3 will display the Command
Menu with commands that are applicable to the device type and its features, such as
Program/Verify Device, Verify Device and All Functions.
5.3.2.1
Select “Program Verify Device” to program the device in the socket module with the hex
file that was previously loaded into the internal memory of the device programmer. This
is referred to as the image. If the hex file has not been loaded, the system displays a
message stating “Valid image not present! Please download an image or use a master
device before continuing”. Download the hex file desired for programming the device
into MPLAB PM3 before attempting to continue.
The device programmer checks to see if the installed microcontroller device is blank. If
the device is not blank, the device programmer asks if you want to continue. Answer
“Yes” to continue. Answer “No” to return to the Command menu.
If a flash device is in use, the device will immediately be programmed with the image
in the MPLAB PM3. If a One-Time Programmable (OTP) device is being used and the
Blank Check Override is enabled on MPLAB PM3, two options (Stop Programming and
Continue) will display if the device is not blank. Select “Stop Programming” if you do not
wish programming to continue. Otherwise, select “Continue” and the device will be pro-
grammed.
MPLAB PM3 programs the image of the hex file into the microcontroller device con-
nected to the programmer.
Recently Used
Select Device
PROGRAM/VERIFY DEVICE
MPLAB
Recently Used
Select Device
MPLAB PM3 Card
Programmer Settings
Help
®
PM3 MAIN MENU
MPLAB
®
PM3
© 2006 Microchip Technology Inc.