S1D13505 Epson Electronics America, Inc., S1D13505 Datasheet - Page 321

• Manufacturer Part Number: S1D13505
• Description: LCD Controller
• Manufacturer: Epson Electronics America, Inc.

Epson Research and Development
Vancouver Design Center
S1D13505 Supported Evaluation Platforms
Installation
Usage
13505BMP Demonstration Program
Issue Date: 01/02/02
13505BMP
Note
13505BMP is a demonstration utility used to show the S1D13505 display capabilities by rendering
bitmap images on the display. The program will display any bitmap in Windows BMP file format
and then exit. 13505BMP also loads images to demonstrate the hardware cursor and ink layer.
13505BMP is designed to operate on a personal computer (PC) in the DOS environment only. Other
embedded platforms are not supported due to the possible lack of system memory or structured file
system.
The 13505BMP demonstration utility must be configured and/or compiled to work with your
hardware configuration. The program 13505CFG.EXE can be used to configure 13505BMP.
Consult the 13505CFG users guide, document number X23A-B-001-xx, for more information on
configuring S1D13505 utilities.
13505BMP supports the following S1D13505 evaluation platforms:
• PC system with an Intel 80x86 processor.
Copy the file 13505BMP.EXE to a directory that is in the DOS path on your hard drive.
At the prompt, type 13505bmp bmpfile [t=reg | cursor | ink] [x=n y=n]
[/buffer] [/crt] [/lcd] [/mouse] [/noclear] [/noinit] [/p] [/v]
[/?].
Where:
The 13505BMP source code may be modified by the OEM to support other evaluation platforms.
bmpfile
t=??
x=n
y=n
/buffer
/crt
/lcd
filename of a windows format bmp image
reg:
cursor: hardware cursor image
ink:
n = starting cursor x position (default position = 0)
n = starting cursor y position (default position = 0)
enable double buffering (image not displayed until completely loaded
in memory)
displays the image on a CRT
displays the image on an LCD panel
regular display image
ink layer image
X23A-B-006-04
S1D13505
Page 1