MC68HC908JB8JPE Freescale Semiconductor, MC68HC908JB8JPE Datasheet - Page 61

• Manufacturer Part Number: MC68HC908JB8JPE
• Description: IC MCU FLASH 8BIT 8K 20-DIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908JB8JPE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 3MHz
• Connectivity: USB
• Peripherals: LVD, POR, PWM
• Number Of I /o: 13
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Controller Family/series: HC08
• No. Of I/o's: 13
• Ram Memory Size: 256Byte
• Cpu Speed: 3MHz
• No. Of Timers: 1
• Embedded Interface Type: USB
• Rohs Compliant: Yes
• Processor Series: HC08JB
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: USB
• Maximum Clock Frequency: 3 MHz
• Number Of Programmable I/os: 37
• Number Of Timers: 2
• Operating Supply Voltage: 4 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• Development Tools By Supplier: FSICEBASE, DEMO908GZ60E, M68EML08GZE, KITUSBSPIDGLEVME, KITUSBSPIEVME, KIT33810EKEVME
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

4.9 ROM-Resident Routines
MC68HC908JB8•MC68HC08JB8•MC68HC08JT8 — Rev. 2.3
Freescale Semiconductor
ROM-resident routines can be called by a program running in user mode
or in monitor mode (see
programming, erasing, and verifying. The range of the FLASH memory
must be unprotected (see
erase or programming routine.
BPR0 is used only for BPR[7:0] = $FF, for no block protection.
The resultant 16-bit address is used for specifying the start address
of the FLASH memory for block protection. The FLASH is protected
from this start address to the end of FLASH memory, at $FFFF. With
this mechanism, the protect start address can be X000, X200, X400,
X600, X800, XA00, XC00, or XE00 within the FLASH memory.
Examples of protect start address:
PROGRAM
Routine
VERIFY
ERASE
Name
and so on...
Note:
The end address of the protected range is always $FFFF.
$DE (1101 1110)
$E0 (1110 0000)
$E2 (1110 0010)
$E4 (1110 0100)
$00 to $DC
BPR[7:0]
$FE
$FF
FLASH Memory
Table 4-1. ROM-Resident Routines
Call Address
$FC03
$FC06
$FC09
Section 10. Monitor ROM
4.8 FLASH
The entire FLASH memory is not protected.
FLASH verify routine
FLASH mass erase routine
FLASH program routine
The entire FLASH memory is protected.
Start of Address of Protect Range
$DE00 (1101 1110 0000 0000)
$E000 (1110 0000 0000 0000)
$E200 (1110 0010 0000 0000)
$E400 (1110 0100 0000 0000)
$FFE0–$FFFF (User vectors)
Protection) before calling the
Routine Function
ROM-Resident Routines
(MON)) for FLASH
FLASH Memory
Technical Data
61