D12312SVTEBL25 Renesas Electronics America, D12312SVTEBL25 Datasheet - Page 843

• Manufacturer Part Number: D12312SVTEBL25
• Description: IC H8S MCU ROMLESS 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12312SVTEBL25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412312SVTEBL25; HD6412312SVTEBL25

19.5
19.5.1
Module stop mode can be set for individual on-chip supporting modules.
When the corresponding MSTP bit in MSTPCR is set to 1, module operation stops at the end of
the bus cycle and a transition is made to module stop mode. The CPU continues operating
independently.
Table 19.3 shows MSTP bits and the corresponding on-chip supporting modules.
When the corresponding MSTP bit is cleared to 0, module stop mode is cleared and the module
starts operating at the end of the bus cycle. In module stop mode, the internal states of modules
other than the SCI and A/D converter are retained.
After reset clearance, all modules other than DTC are in module stop mode.
When an on-chip supporting module is in module stop mode, read/write access to its registers is
disabled.
Do not make a transition to sleep mode with MSTPCR set to H'FFFF or H'EFFF, as this will halt
operation of the bus controller.
Module Stop Mode
Module Stop Mode
Rev.7.00 Feb. 14, 2007 page 809 of 1108
Section 19 Power-Down Modes
REJ09B0089-0700