DF2238RTF6 Renesas Electronics America, DF2238RTF6 Datasheet - Page 217

• Manufacturer Part Number: DF2238RTF6
• Description: MCU 2.2/3V 256K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2238RTF6

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 6MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2238RTF6; HD64F2238RTF6

5.6.2
The instructions that disable interrupts are LDC, ANDC, ORC, and XORC. After any of these
instructions are executed, all interrupts including NMI are disabled and the next instruction is
always executed. When the I bit is set by one of these instructions, the new value becomes valid
two states after execution of the instruction ends.
5.6.3
There are times when interrupt acceptance is disabled by the interrupt controller.
The interrupt controller disables interrupt acceptance for a 3-state period after the CPU has
updated the mask level with an LDC, ANDC, ORC, or XORC instruction.
5.6.4
Interrupt operation differs between the EEPMOV.B instruction and the EEPMOV.W instruction.
With the EEPMOV.B instruction, an interrupt request (including NMI) issued during the transfer
is not accepted until the move is completed.
Internal
address bus
Internal
write signal
CMIEA
CMFA
CMIA
interrupt signal
When Interrupts are Disabled
Instructions that Disable Interrupts
Interrupts during Execution of EEPMOV Instruction
φ
Figure 5.9 Contention between Interrupt Generation and Disabling
TCR write cycle by CPU
TCR address
Rev. 6.00 Mar. 18, 2010 Page 155 of 982
CMIA exception handling
Section 5 Interrupt Controller
REJ09B0054-0600