MCF5272VF66R2J Freescale Semiconductor, MCF5272VF66R2J Datasheet - Page 262

• Manufacturer Part Number: MCF5272VF66R2J
• Description: IC MCU 166MHZ 196MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF527xr

Specifications of MCF5272VF66R2J

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART, USB
• Peripherals: DMA, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (4K x 32)
• Program Memory Type: ROM
• Ram Size: 1K x 32
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 196-MAPBGA
• Processor Series: MCF527x
• Core: ColdFire V2
• 3rd Party Development Tools: JLINK-CF-BDM26, EWCF
• Development Tools By Supplier: NNDK-MOD5272-KIT, NNDK-MOD5270-KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: No

Universal Serial Bus (USB)
However, to reduce power consumption, USB_VDD may be left unconnected if either of the following is
true:
12.2.1.2
The USB module requires two clock inputs; the system clock and a 48-MHz data clock. The data clock
source is selectable between the USB_ExtCLK pin or the system clock. The clock generator automatically
uses the external clock as the data clock if it detects the presence of a clock signal on the USB_CLK pin
during system reset. This automatic selection can be overridden by setting bit USBEPCTL0[CLK_SEL],
. If a clock signal is not present on USB_CLK, the clock generator uses the system clock.
12.2.1.3
The control logic performs the following functions:
12-4
•
•
•
•
•
The USB module is not used.
An external transceiver is used.
For transmitted data:
— Packet creation
— Parallel-to-serial conversion
— CRC generation
— NRZI encoding
— Bit stuffing
For received data:
— Sync detection
— Packet identification
— End-of-packet detection
— Serial-to-parallel conversion
— CRC validation
— NRZI decoding
— Bit unstuffing
For error detection:
— Bad CRC
— Timeout waiting for end-of-packet
— Bit stuffing violations
Clock Generator
USB Control Logic
In all cases, the system clock must be at least 24-MHz for the USB module
to function properly. If the system clock is used for the USB data clock, the
system clock frequency must be 48-MHz.
MCF5272 ColdFire
®
Integrated Microprocessor User’s Manual, Rev. 3
NOTE
Freescale Semiconductor