HD6417750SBP200 Renesas Electronics America, HD6417750SBP200 Datasheet - Page 280

• Manufacturer Part Number: HD6417750SBP200
• Description: IC SUPERH MPU ROMLESS 256BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417750SBP200

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 28
• Program Memory Type: ROMless
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 2.07 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Section 6 Floating-Point Unit (FPU)
• Enable/disable exception handling
Rev.7.00 Oct. 10, 2008 Page 194 of 1074
REJ09B0366-0700
The FPSCR cause field contains bits corresponding to all of above sources E, V, Z, O, U, and
I, and the FPSCR flag and enable fields contain bits corresponding to sources V, Z, O, U, and
I, but not E. Thus, FPU errors cannot be disabled.
When an exception source occurs, the corresponding bit in the cause field is set to 1, and 1 is
added to the corresponding bit in the flag field. When an exception source does not occur, the
corresponding bit in the cause field is cleared to 0, but the corresponding bit in the flag field
remains unchanged.
The FPU supports enable exception handling and disable exception handling.
Enable exception handling is initiated in the following cases:
⎯ FPU error (E): FPSCR.DN = 0 and a denormalized number is input
⎯ Invalid operation (V): FPSCR.EN.V = 1 and (instruction = FTRV or invalid operation)
⎯ Division by zero (Z): FPSCR.EN.Z = 1 and division with a zero divisor
⎯ Overflow (O): FPSCR.EN.O = 1 and instruction with possibility of operation result
⎯ Underflow (U): FPSCR.EN.U = 1 and instruction with possibility of operation result
⎯ Inexact exception (I): FPSCR.EN.I = 1 and instruction with possibility of inexact operation
For information on these possibilities, see the individual instruction descriptions in chapter 9 of
the SH-4 Software Manual. The particulars differ demanding on the instruction. All exception
events that originate in the FPU are assigned as the same exception event. The meaning of an
exception is determined by software by reading system register FPSCR and interpreting the
information it contains. If no bits are set in the cause field of FPSCR when one or more of bits
O, U, I, and V (in case of FTRV only) are set in the enable field, this indicates that an actual
exception source is not generated. Also, the destination register is not changed by any enable
exception handling operation.
Except for the above, the FPU disables exception handling. In all processing, the bit
corresponding to source V, Z, O, U, or I is set to 1, and disable exception handling is provided
for each exception.
⎯ Invalid operation (V): qNAN is generated as the result.
⎯ Division by zero (Z): Infinity with the same sign as the unrounded value is generated.
overflow
underflow
result