DK-DEV-4SGX530N Altera, DK-DEV-4SGX530N Datasheet - Page 11

• Manufacturer Part Number: DK-DEV-4SGX530N
• Description: KIT DEVELOPMENT STRATIX IV
• Manufacturer: Altera
• Series: Stratix® IV GXr
• Type: FPGAr

Specifications of DK-DEV-4SGX530N

• Contents: Board, Cable, Documentation, Power Supply
• For Use With/related Products: Stratix® IV GX
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 544-2714

Chapter 2: Board Components
Board Overview
Table 2–1. Stratix IV GX FPGA Development Board Components (Part 2 of 3)
August 2010 Altera Corporation
D26
D27
D24
D32, D33, D34,
D35
D3, D4
D1
D14, D15
D2
D30
D25
D37, D38, D39
Clock Circuitry
X1
X2
X3
X6
X7
X8
J15, J14
J9
General User Input and Output
D6-D13
D16-D23
SW3
S1
S2
S3, S4, S5
SW2
Board Reference
Load LED
Error LED
Power LED
Ethernet LEDs
HSMC port A LEDs
HSMC port A Present LED
HSMC port B LEDs
HSMC port B Present LED
SDI mute LED
PCI Express Gen 2 LED
PCI Express Link LEDs
125 M oscillator
156 M oscillator
148 M oscillator
100 M oscillator
155 M oscillator
50 M oscillator
Clock input SMAs
Clock output SMA
User LEDs
User DIP switch
Reset configuration
push-button switch
CPU reset push-button switch
General user push-button
switches
Power monitor rotary switch
Type
Illuminates during embedded USB-Blaster data transfers.
Illuminates when the FPGA configuration from flash fails.
Illuminates when 12-V power is present.
Shows the connection speed as well as transmit or receive activity.
You can configure these LEDs to indicate transmit or receive activity.
Illuminates when a daughtercard is plugged into the HSMC port A.
You can configure these LEDs to indicate transmit or receive activity.
Illuminates when a daughtercard is plugged into the HSMC port B.
Illuminates when the SDI receiver is muted.
You can configure this LED to illuminate when PCI Express is in Gen 2
mode.
You can configure these LEDs to display the PCI Express link width
(x1, x4, x8).
125.000-MHz crystal oscillator for Gigabit Ethernet, Serial RapidIO™
(SRIO), or PCI Express.
156.250-MHz crystal oscillator for 10 Gigabit Ethernet or XAUI.
148.500-MHz voltage controlled crystal oscillator for SDI Video.
100.000-MHz crystal oscillator for PCI Express or general use such as
memories. Multiplex with CLKIN_SMA_P based on CLK_SEL switch
value.
155.520-MHz crystal oscillator for SONET.
50.000-MHz crystal oscillator for general purpose logic.
Drives LVPECL-compatible clock inputs into the U50 clock multiplexer
buffer.
Drives out 2.5-V CMOS clock outputs from the FPGA.
16 user LEDs. Illuminates when driven low.
Octal user DIP switches. When the switch is ON, a logic 0 is selected.
Press to reconfigure the FPGA from the flash memory.
Press to reset the Max II CPLD EPM2210 System Controller and FPGA
logic.
Three user push-button switches. Driven low when pressed.
Selects the power rail being measured. It also selects the FPGA image
to load on power-up; 0 selects factory image and 1 selects
user-defined image.
Stratix IV GX FPGA Development Board Reference Manual
Description
2–3