CYII5SC1300AA-QDC Cypress Semiconductor Corp, CYII5SC1300AA-QDC Datasheet - Page 19

• Manufacturer Part Number: CYII5SC1300AA-QDC
• Description: IC SENSOR IMMAGE COLOR 84-LCC
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYII5SC1300AA-QDC

• Pixel Size: 6.7µm x 6.7µm
• Active Pixel Array: 1280H x 1024V
• Frames Per Second: 27
• Voltage - Supply: 3 V ~ 4.5 V
• Package / Case: 84-LCC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Name
Supply and ground connections
VDDC
VDDA
GNDA
GNDD
VDDD
GNDAB
VDDR_LEFT
VDDH
VDDR_RIGHT
Digital controls
Y_START
Y_CLOCK
LAST_LINE
X_LOAD
SYS_CLOCK
PXL_VALID
SS_START
SS_STOP
TIME_OUT
SYS_RESET
EOS_X
Reference voltages
DEC_CMD
COL_CMD
PC_CMD
Contact
Cypress Semiconductor Corporation
IBIS5-A-1300
Datasheet
[e-mail]
No.
7, 37
8, 36
9, 35
10, 34
11, 33
51
76
77
52
14 (input)
15 (input)
16
(output)
17 (input)
18 (input)
19
(output)
20 (input)
21 (input)
22
(output)
23 (input)
25
(output)
13
31
32
Table 11: Pins involved in the image core circuitry
Document #: 38-05710 Rev.**(Revision 1.3)
Function
Supply of the pixel core.
Analog supply of the image core.
Analog ground of the image core.
Digital ground of the image core.
Digital supply of the image core.
Anti-blooming ground.
High level reset
High supply voltage for hold switches in the image core.
Multiple slope reset voltage.
Start frame read out.
Line clock.
Generates a high level when the last line is read out.
Loads new X-position during read out.
System (pixel) clock (max. 40MHz).
Pixel valid signal; high during row read out.
Start synchronous shutter operation.
Stop synchronous shutter operation.
Synchronous shutter: pulse when integration time is
elapsed. Can be used to trigger SS_STOP although both
signals can’t be tied together.
Rolling shutter: pulse when second Y-sync appears
Active high signal; have to be pulsed for minimal 5 clock
cycles. All registers are set to 0 and sensor is put in a
default state. SYS_RESET should be pulsed each time at
start up of the sensor.
Diagnostic end of scan of X-register.
Decoder bias voltage.
Column amplifier bias.
Pre-charge bias voltage.
3901 North First Street
San Jose, CA 95134
Page 19 of 67
408-943-2600