CYII5SC1300AA-QDC Cypress Semiconductor Corp, CYII5SC1300AA-QDC Datasheet - Page 26

• Manufacturer Part Number: CYII5SC1300AA-QDC
• Description: IC SENSOR IMMAGE COLOR 84-LCC
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYII5SC1300AA-QDC

• Pixel Size: 6.7µm x 6.7µm
• Active Pixel Array: 1280H x 1024V
• Frames Per Second: 27
• Voltage - Supply: 3 V ~ 4.5 V
• Package / Case: 84-LCC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Name
Analog signals
PXL_OUT1
PXL_OUT2
Digital Controls
EL_BLACK
Reference voltages
DAC_VHIGH
DAC_VLOW
AMP_CMD
Contact
Cypress Semiconductor Corporation
IBIS5-A-1300
Datasheet
[e-mail]
No.
28
29
24
26
27
30
Table 15: Pins involved in the output amplifier circuitry
Function
Analog output signal
To be connected to the input of the ADC (ADC_IN, pin 69)
Analog output signal
To be connected to the input of the ADC (ADC_IN, pin 69)
Note: 2 Outputs were designed for debugging reasons but it seemed
not necessary. It is possible to use them both if you want to send even
and odd pixels (or lines) to 2 outputs. There is no speed gain when
using 2 outputs because the 2 outputs run at a halved output rate
(20MHz). It recommended to use only one analog output (connect
PXL_OUT1 to ADC_IN).
Active high digital input.
When this signal is pulsed a hardware black level is fed to the output
amplifier instead of the normal pixel values. The hardware black level
can be changed by the DAC_RAW register.
High reference voltage of the DAC.
Low reference voltage of the DAC.
Output amplifier speed/power bias voltage. Can be used to enhance
the speed of the output stage.
Document #: 38-05710 Rev.**(Revision 1.3)
3901 North First Street
San Jose, CA 95134
Page 26 of 67
408-943-2600