CYII5SC1300AA-QDC Cypress Semiconductor Corp, CYII5SC1300AA-QDC Datasheet - Page 50

• Manufacturer Part Number: CYII5SC1300AA-QDC
• Description: IC SENSOR IMMAGE COLOR 84-LCC
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYII5SC1300AA-QDC

• Pixel Size: 6.7µm x 6.7µm
• Active Pixel Array: 1280H x 1024V
• Frames Per Second: 27
• Voltage - Supply: 3 V ~ 4.5 V
• Package / Case: 84-LCC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

IBIS5-A-1300
Datasheet
4.7 Windowing in Y-direction
Figure 28: Windowing in the Y-direction
A new Y-pointer can be loaded into the Y-shift-register, by reapplying the Y
pulse
_START
after loading a new Y-pointer value into the Y
and Y
registers.
L_REG
R_REG
Every time a Y
pulse appears, a frame calibration of the output amplifier is done.
_START
4.8 Initialization (start up behaviour)
To avoid any high current consumption at start up it is recommended to apply the
SYS_CLOCK signal as soon as possible after or even before power on of the image
sensor.
After power on of the image sensor it is recommended to apply SYS_RESET for minimal
5 SYS_CLOCK periods to assure a proper reset of the on-chip sequencer and timing
circuitry. All internal register will be set to 0 after SYS_RESET is applied.
As all the IBIS5-A-1300 control signal are active high it is also recommended to apply a
low level (before SYS_RESET occurs) to these pins at start up to avoid latch up.
Cypress Semiconductor Corporation
3901 North First Street
San Jose, CA 95134
408-943-2600
Contact
[e-mail]
Document #: 38-05710 Rev.**(Revision 1.3)
Page 50 of 67