CYII5SC1300AA-QDC Cypress Semiconductor Corp, CYII5SC1300AA-QDC Datasheet - Page 38

• Manufacturer Part Number: CYII5SC1300AA-QDC
• Description: IC SENSOR IMMAGE COLOR 84-LCC
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYII5SC1300AA-QDC

• Pixel Size: 6.7µm x 6.7µm
• Active Pixel Array: 1280H x 1024V
• Frames Per Second: 27
• Voltage - Supply: 3 V ~ 4.5 V
• Package / Case: 84-LCC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

yr_sync pulse for the right Y-shift register is generated which loads the right Y-shift
register (reset Y-shift register) with the pointer loaded in Y
The integration time counter is reset when the sync for the left Y-shift register is asserted.
Both shift registers keep moving until the next sync is asserted (Y
shift register and the sync for the right Y-shift register is generated when the integration
time counter reaches the I
T
The actual integration time is given by:
T
3.10.2.5 X_REG register (10:0)
The X_
direction, there are 640 possible starting positions (2 pixels are addressed at the same time
in one clock cycle). If sub sampling is enabled only the even pixels can be set as starting
position (for instance: 0, 2, 4, 6, 8… 638).
3.10.2.6 YL_REG (10:0) and YR_REG (10:0)
The Y
direction. In this direction, there are 1024 possible starting positions. In rolling shutter
mode the Y
sets the start position of the reset (right) pointer. For both shutter types Y
always be equal to
3.10.2.7 Image core register (7:0)
Bits 1:0 of the I
the default and normal operation mode. In case the bit is set to 1, the odd (bit 1) or even
(bit 0) columns are tight to the reset level. If the internal ADC is used bits 0 and 1 can be
used to create test pattern to test the sample moment of the ADC. If the ADC sample
moment is not chosen correctly the created test pattern will not be black-white-black-etc.
reg_int
int
Contact
Cypress Semiconductor Corporation
IBIS5-A-1300
L
Difference between left and right pointer = value set in the I
(number of lines).
Integration time [# lines] = N
Datasheet
REG
_
shift-register
Sync of left
REG
Figure 17: Synchronization of the shift registers in rolling shutter mode.
[e-mail]
L_REG
register determines the start position of the window in the X-direction. In this
and
MAGE
YR_REG
register sets the start position of the read (left) pointer and the Y
YR_REG.
_
CORE
Line n
NT_TIME
registers determine the start position of the window in the Y-
register define the test mode of the image core. Setting 00 is
Document #: 38-05710 Rev.**(Revision 1.3)
3901 North First Street
value).
ROF
Sync of right
shift-register
_
LINES
register - I
T
reg_int
San Jose, CA 95134
NT
Sync
Last line, followed by sync
of left shift-register
_
R
TIME
_
REG
_START
register
Page 38 of 67
register (Figure 17).
NT
_
408-943-2600
for the left Y-
L
TIME
_
REG
register
should
R_REG
T
int