AT32UC3C2512C Automotive Atmel Corporation, AT32UC3C2512C Automotive Datasheet - Page 936

• Manufacturer Part Number: AT32UC3C2512C Automotive
• Manufacturer: Atmel Corporation

•
• NBUSYBKE: Number of Busy Banks Interrupt Enable
• RAMACERE: RAMACER Interrupt Enable
• STALLEDE: STALLed Interrupt Enable
• CRCERRE: CRC Error Interrupt Enable
• NAKINE: NAKed IN Interrupt Enable
• NAKOUTE: NAKed OUT Interrupt Enable
• RXSTPE: Received SETUP Interrupt Enable
• ERRORFE: Errorflow Interrupt Enable
• RXOUTE: Received OUT Data Interrupt Enable
• TXINE: Transmitted IN Data Interrupt Enable
9166C–AVR-08/11
KILLBK: Kill IN Bank
This bit is cleared by hardware after the completion of the “kill packet procedure”.
This bit is set when the KILLBKS bit is written to one, killing the last written bank.
The user shall wait for this bit to be cleared before trying to process another IN packet.
Caution: The bank is cleared when the “kill packet” procedure is completed by the USBC core:
If the bank is really killed, the NBUSYBK field is decremented.
If the bank sent instead of killed (IN transfer), the NBUSYBK field is decremented and the TXINI flag is set. This specific case
Note: If two banks are ready to be sent, the above specific case will not occur, since the first bank is sent (IN transfer) while the
This bit is cleared when the NBUSYBKEC bit is written to zero, disabling the Number of Busy Banks interrupt (NBUSYBK).
This bit is set when the NBUSYBKES bit is written to one, enabling the Number of Busy Banks interrupt (NBUSYBK).
This bit is cleared when the RAMACEREC bit is written to one, disabling the RAMACER interrupt (RAMACERI).
This bit is set when the RAMACERES bit is written to one, enabling the RAMACER interrupt (RAMACERI).
This bit is cleared when the STALLEDEC bit is written to one, disabling the STALLed interrupt (STALLEDI).
This bit is set when the STALLEDES bit is written to one, enabling the STALLed interrupt (STALLEDI).
This bit is cleared when the CRCERREC bit is written to one, disabling the CRC Error interrupt (CRCERRI).
This bit is set when the CRCERRES bit is written to one, enabling the CRC Error interrupt (CRCERRI).
This bit is cleared when the NAKINEC bit is written to one, disabling the NAKed IN interrupt (NAKINI).
This bit is set when the NAKINES bit is written to one, enabling the NAKed IN interrupt (NAKINI).
This bit is cleared when the NAKOUTEC bit is written to one, disabling the NAKed OUT interrupt (NAKOUTI).
This bit is set when the NAKOUTES bit is written to one, enabling the NAKed OUT interrupt (NAKOUTI).
This bit is cleared when the RXSTPEC bit is written to one, disabling the Received SETUP interrupt (RXSTPI).
This bit is set when the RXSTPES bit is written to one, enabling the Received SETUP interrupt (RXSTPI).
This bit is cleared when the ERRORFEC bit is written to one, disabling the Underflow interrupt (ERRORFI).
This bit is set when the ERRORFES bit is written to one, enabling the Underflow interrupt (ERRORFI).
This bit is cleared when the RXOUTEC bit is written to one, disabling the Received OUT Data interrupt (RXOUT).
This bit is set when the RXOUTES bit is written to one, enabling the Received OUT Data interrupt (RXOUT).
This bit is cleared when the TXINEC bit is written to one, disabling the Transmitted IN Data interrupt (TXINI).
This bit is set when the TXINES bit is written to one, enabling the Transmitted IN Data interrupt (TXINI).
can occur if an IN token comes while the user tries to kill the bank.
last bank is killed.
AT32UC3C
936