TMP91xy25FG Toshiba, TMP91xy25FG Datasheet - Page 37

• Manufacturer Part Number: TMP91xy25FG
• Manufacturer: Toshiba

Specifications of TMP91xy25FG

• Package: LQFP100
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: Ramless
• Architecture: 16-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 2
• I2c/sio Bus Channels: -
• (s)dram Controller: -
• Adc 10-bit Channel: 4
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: -
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 49
• Power Supply Voltage(v): 3.0 to 3.6

Note: When different modes are used before and after STOP mode as the above mentioned , there
is possible to release the HALT mode without changing the operation mode by acceptance of
the halt release interrupt request during execution of HALT instruction (during 6 states). In the
system which accepts the interrupts during execution HALT instruction, set the same
operation mode before and after the STOP mode.
operates after releasing due to INTx.
(Setting example)
The STOP mode is entered when the low-frequency operates, and high-frequency
Address
8FFDH
9000H
9002H
9005H
9006H
INTx
SYSCR0
SYSCR1
SYSCR2
EQU
EQU
EQU
LD
LD
LD
HALT
LD
91C025-35
00E0H
00E1H
00E2H
(SYSCR1), 08H
(SYSCR2), - X1001-1B
(SYSCR0), 011000 - - B
XX, XX
; f
; Sets warm-up time to 2
; Operates high-frequency after released.
SYS
− : No change
= fs/2.
14
INTx interrupt routine
Clears and starts hit
/f
OSCH
(High-frequency)
warm-up timer.
TMP91C025
RETI
2007-02-28
.
End