SPC8104 S-MOS Systems, SPC8104 Datasheet - Page 79

• Manufacturer Part Number: SPC8104
• Description: VGA LCD CONTROLLER
• Manufacturer: S-MOS Systems

SPC8104
14. When the internal clock rate is reduced, the DRAM interface and the display interface are running at a slower
15. When the MEMEN pin is selected as the refresh clock source, this input will not be masked during Software
16. Static display with black and white only gray shades.
17. LUT cannot be accessed if the CLKI disable bit Aux[03] bit 4 is set in Software Suspend mode.
412-1.0
rate so that power consumption can be reduced. However this may cause the LCD display to flicker. The
clock dividing factor should be chosen so that the amount of display flicker is acceptable. The reduced inter-
nal clock rate will not affect the DRAM refresh rate. This option is intended to be used with active panels
which are less susceptible to varying frame rate.
Suspend Mode and Hardware Suspend Mode.
S-MOS Systems, Inc. • Tel: [phone] • Fax: [phone] • http://www.smos.com
X15-SP-001-08.1
Hardware Functional Specification
SP1-53