MC56F8035VLDR Freescale Semiconductor, MC56F8035VLDR Datasheet - Page 2

• Manufacturer Part Number: MC56F8035VLDR
• Description: Digital Signal Processors & Controllers - DSP, DSC 16 BIT DSPHC 64KB
• Manufacturer: Freescale Semiconductor

Specifications of MC56F8035VLDR

• Rohs: yes
• Core: 56800E
• Data Bus Width: 16 bit
• Program Memory Size: 64 KB
• Data Ram Size: 8 KB
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 3
• Device Million Instructions Per Second: 32 MIPs
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Package / Case: LQFP-44
• Mounting Style: SMD/SMT

2
Rev. 0
Rev. 1
Rev. 2
Rev. 3
Rev. 4
Rev. 5
Version History
Initial public release.
• In Table 5-3, changed the ITCN_BASE address from $00 F060 (incorrect value) to
• In Table 10-4, added an entry for flash data retention with less than 100 program/erase
• In Table 10-6, changed the device clock speed in STOP mode from 8MHz to 4MHz.
• In Table 10-12, changed the typical relaxation oscillator output frequency in Standby mode
• Changed input propagation delay values in Table 10-20 as follows:
• In Table 10-19, changed the maximum ADC internal clock frequency from 8MHz to
• Replaced the case outline schematics in Figure 11-2, Figure 11-3, and Figure 11-4.
Added the following note to the description of the TMS signal in Table 2-3:
Note:
• Changed the VBA register reset value and updated the footnote in
• Changed the STANDBY > STOP I
• Changed the POWERDOWN I
• Changed footnote 1 in
• Deleted the text “at 125°C” from
• Changed the maximum input offset voltage in
• In
• Revised
• Fixed miscellaneous typos.
$00 F0E0 (the correct value).
cycles (minimum 20 years).
from 400kHz to 200kHz.
5.33MHz.
value, at 125°C.”, is “Output frequency after application of factory trim”).
Table
Always tie the TMS pin to V
Section 7, Security
2-3, change V
56F8035/56F8025 Data Sheet, Rev. 6
Document Revision History
New values: 35 ns typical, 45 ns maximum
Table 10-12
CAP
Old values: 1 s typical, 2 s maximum
value from 4.7 F to 2.2 F.
Maximum: was 390 A, is 650 A
Maximum: was 250 A, is 550 A
Typical: was 290 A, is 540 A
Typical: was 190 A, is 440 A
Features.
DD
DD
Description of Change
Figure
values in
DD
through a 2.2K resistor.
(was “Output frequency after application of 8MHz trim
values in
10-5.
Table 10-6
Table 10-20
Table 10-6
as follows:
as follows:
(was +/- 20 mV, is ±35 mV).
Section
Freescale Semiconductor
5.6.8.