S1D13A04F00A Epson Electronics America Inc-Semiconductor Div, S1D13A04F00A Datasheet - Page 338

• Manufacturer Part Number: S1D13A04F00A
• Description: IC LCD COMPANION 160KB 128-TQFP
• Manufacturer: Epson Electronics America Inc-Semiconductor Div

Specifications of S1D13A04F00A

• Display Type: LCD
• Voltage - Supply: 1.8 V ~ 2.75 V
• Mounting Type: Surface Mount
• Package / Case: 125-TQFP, 125-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Operating Temperature: -
• Interface: -
• Configuration: -
• Digits Or Characters: -
• Other names: S1D13A04F00A100; S1D13A04F00A100

Page 8
S1D13A04
X37A-B-002-01
Run scriptfile
This command opens the file scriptfile and executes each line as if it were typed from the
command prompt. For more information on scriptfiles, see Section , “Script Files” on
page 12.
Where:
S[8|16|32] startaddr endaddr|len data1 [data2 data3 data4 ...]
Search the display buffer for the given data.
Where:
Show
Shows a test pattern on the display. The test pattern is based on current register settings and
may not display correctly if the registers are not configured properly.
Use this command to display an image during testing. After adjusting a register value, use
the show command to view the effect on the display.
scriptfile
8|16|32
startaddr
endaddr|len
data
The file containing 13A04PLAY commands
The unit size: 8-bit (bytes), 16-bit (words), 32-bit (dwords).
If a unit size is not specified, this command uses the unit size
from the last Search command performed. If no previous
Search command has been issued, the unit size defaults to
8-bit.
The starting address to begin the search from. Specifying a
period (.) uses the same starting address as the last Search
command performed.
Determines how many units of the display buffer will be
searched through. A number without a prefix represents a
physical ending address. If a “L” prefix is used, the number
that follows represents len, or the number of
bytes/words/dwords to be searched through. Len is based on
the unit size. For example, 'L8' when the unit size is 16-bit
would cause the Search command to search 8 words from
the starting address.
The value(s) to search the display buffer for. Values can be
combinations of 'text' or numbers. Numbers are
assumed to be hexadecimal values unless otherwise
specified with the correct suffix (binary = i, octal = o,
decimal = t, hexadecimal = h).
For example, 101i = 101 binary.
Epson Research and Development
13A04PLAY Diagnostic Utility
Vancouver Design Center
Issue Date: 01/10/05