MCHC912B32CFUE8 Freescale Semiconductor, MCHC912B32CFUE8 Datasheet - Page 119

• Manufacturer Part Number: MCHC912B32CFUE8
• Description: IC MCU 32K FLASH 8MHZ 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MCHC912B32CFUE8

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 63
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 768 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Cpu Family: HC12
• Device Core Size: 16b
• Frequency (max): 8MHz
• Interface Type: SCI/SPI
• Total Internal Ram Size: 1KB
• # I/os (max): 63
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 80
• Package Type: PQFP
• Package: 80PQFP
• Family Name: HC12
• Maximum Speed: 8 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 63
• Processor Series: HC912B
• Core: HC12
• Data Ram Size: 1 KB
• Maximum Clock Frequency: 8 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: M68EVB912B32E
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.7.3 Real-Time Interrupt Flag Register
RTIF — Real-Time Interrupt Flag Bit
10.7.4 COP Control Register
Read: Anytime
Write: Varies on a bit by bit basis
CME — Clock Monitor Enable Bit
FCME — Force Clock Monitor Enable Bit
FCM — Force Clock Monitor Reset Bit
Freescale Semiconductor
This bit is cleared automatically by a write to this register with this bit set.
Write anytime.
If FCME is set, this bit has no meaning or effect.
Write once in normal modes, anytime in special modes.
In normal modes, when this bit is set, the clock monitor function cannot be disabled until a reset occurs.
To use both STOP and clock monitor, the CME bit should be cleared prior to executing a STOP
instruction and set after recovery from STOP. Always keep FCME = 0, if STOP will be used.
Writes are not allowed in normal modes, anytime in special modes.
If DISR is set, this bit has no effect.
0 = Timeout has not yet occurred.
1 = Set when the timeout period is met
0 = Clock monitor is disabled; slow clocks and STOP instruction may be used.
1 = Slow or stopped clocks (including the STOP instruction) cause a clock reset sequence.
0 = Clock monitor follows the state of the CME bit.
1 = Slow or stopped clocks cause a clock reset sequence.
0 = Normal operation
1 = Force a clock monitor reset, if clock monitor is enabled.
Normal Reset:
Special Reset:
Address: $0015
Address: $0016
Reset:
Read:
Write:
Read:
Write:
Figure 10-7. Real-Time Interrupt Flag Register (RTIFLG)
RTIF
Bit 7
CME
0
Bit 7
0
0
Figure 10-8. COP Control Register (COPCTL)
FCME
6
0
0
6
0
0
M68HC12B Family Data Sheet, Rev. 9.1
5
0
0
FCM
5
0
0
FCOP
4
0
0
4
0
0
DISR
3
0
0
3
0
1
2
0
0
CR2
2
0
0
1
0
0
CR1
1
0
0
Bit 0
0
0
Bit 0
CR0
1
1
Clock Registers
119