DS26518GN+ Maxim Integrated Products, DS26518GN+ Datasheet - Page 88

• Manufacturer Part Number: DS26518GN+
• Description: IC TXRX T1/E1/J1 8PORT 256-CSBGA
• Manufacturer: Maxim Integrated Products
• Type: Transceiverr

Specifications of DS26518GN+

• Number Of Drivers/receivers: 8/8
• Protocol: T1/E1/J1
• Voltage - Supply: 3.135 V ~ 3.465 V
• Mounting Type: Surface Mount
• Package / Case: 256-CSBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9.12.2 Transmitter
NRZ data arrives from the framer transmitter; the data is encoded with HDB3 or B8ZS or AMI. The encoded data
passes through a jitter attenuator if it is enabled for the transmit path. A digital sequencer and DAC are used to
generate transmit waveforms compliant with T1.102 and G.703 pulse templates.
A line driver is used to drive an internal matched impedance circuit for provision of 75Ω, 100Ω, 110Ω, and 120Ω
terminations. A 560pF capacitor should be placed between TTIPn and TRINGn for each transmitter for proper
operation, as noted in
some E1 applications) via a 1:2 step-up transformer. In order for the device to create the proper waveforms, the
transformer used must meet the specifications listed in
2.048MHz for E1 or 1.544MHz for T1/J1 operation.
The DS26518 drivers have a short-circuit and open-circuit detection driver-fail monitor. The TXENABLE pin can
high impedance the transmitter outputs for protection switching. The individual transmitters can also be placed in
high impedance through register settings. The DS26518 also has functionality for powering down the transmitters
individually. The relevant telecommunications specification compliance is shown in
Table 9-41. Telecommunications Specification Compliance for DS26518 Transmitters
Table 9-42. Transformer Specifications
Turns Ratio 3.3V Applications
Primary Inductance
Leakage Inductance
Intertwining Capacitance
Transmit Transformer DC
Resistance
Receive Transformer DC
Resistance
Transmission and Return Loss Compliance
T1 Telecom Pulse Template Compliance
T1 Telecom Pulse Template Compliance
Transmit Electrical Characteristics for E1
TRANSMITTER FUNCTION
SPECIFICATION
Figure
9-21. The transmitter couples to the E1 or T1 transmit twisted pair (or coaxial cable in
Primary (Device Side)
Secondary
Primary (Device Side)
Secondary
88 of 312
Table
TELECOMMUNICATIONS COMPLIANCE
1:1 (receive) and 1:2 (transmit) ±2%
9-42. The transmitter requires a transmit clock of
RECOMMENDED VALUE
600μH minimum
1.0μH maximum
40pF maximum
1.0Ω maximum
2.0Ω maximum
1.2Ω maximum
1.2Ω maximum
ANSI T1.403
ANSI T1.102
ITU-T G.703
Table
9-41.