SAF1760BE/V1,557 NXP Semiconductors, SAF1760BE/V1,557 Datasheet - Page 72

no-image

SAF1760BE/V1,557

Manufacturer Part Number
SAF1760BE/V1,557
Description
Manufacturer
NXP Semiconductors
Datasheet

Specifications of SAF1760BE/V1,557

Lead Free Status / Rohs Status
Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SAF1760BE/V1,557
Manufacturer:
NXP Semiconductors
Quantity:
10 000
NXP Semiconductors
Table 73.
SAF1760_1
Product data sheet
Bit
DW2
31 to 29
28 to 25
24
23 to 8
7 to 0
DW1
63 to 57
56 to 50
49 to 48
47
46
45 to 44
43 to 42
41 to 35
34 to 32
Symbol
reserved
RL[3:0]
reserved
DataStartAddress
[15:0]
reserved
HubAddress[6:0]
PortNumber[6:0]
SE[1:0]
reserved
S
EPType[1:0]
Token[1:0]
DeviceAddress[6:0]
EndPt[3:1]
Start and complete split for bulk: bit description
Access
-
SW — writes
-
SW — writes
-
SW — writes
SW — writes
SW — writes
-
SW — writes
SW — writes
SW — writes
SW — writes
SW — writes
Rev. 01 — 9 November 2009
Value Description
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Reload: If RL is set to 0h, hardware ignores the NakCnt value.
Set RL and NakCnt to the same value before a transaction. For
full-speed and low-speed transactions, set this field to 0000b.
Not applicable to isochronous start split and complete split.
-
Data Start Address: This is the start address for data that will
be sent or received on or from the USB bus. This is the internal
memory address and not the direct CPU address.
RAM address = (CPU address
-
Hub Address: This indicates the hub address.
Port Number: This indicates the port number of the hub or
embedded TT.
This depends on the endpoint type and direction. It is valid only
for split transactions.
split only.
-
This bit indicates whether a split transaction has to be executed:
0 — High-speed transaction
1 — Split transaction
Endpoint Type:
00 — Control
10 — Bulk
Token: This field indicates the PID for this transaction.
00 — OUT
01 — IN
10 — SETUP
Device Address: This is the USB address of the function
containing the endpoint that is referred to by this buffer.
Endpoint: This is the USB address of the endpoint within the
function.
…continued
Embedded Hi-Speed USB host controller
Table 74
applies to start split and complete
400h) / 8
SAF1760
© NXP B.V. 2009. All rights reserved.
72 of 110

Related parts for SAF1760BE/V1,557