UPD70F3714GC-8BS-A Renesas Electronics America, UPD70F3714GC-8BS-A Datasheet - Page 201

• Manufacturer Part Number: UPD70F3714GC-8BS-A
• Description: MCU 32BIT V850ES/LX2 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Ix2r

Specifications of UPD70F3714GC-8BS-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, UART/USART
• Peripherals: LVD, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
6.6.4
is set to 1. When the valid edge of an external trigger input (TIPk0) is detected, 16-bit timer/event counter P starts
counting, and outputs a one-shot pulse from the TOPm1 pin.
trigger is used, the TOP00 pin outputs the active level while the 16-bit counter is counting, and the inactive level when
the counter is stopped (waiting for a trigger).
This mode is valid only in TMP0, TMP2, and TMP3 (software trigger only for TMP3).
In the one-shot pulse output mode, 16-bit timer/event counter P waits for a trigger when the TPmCTL0.TPmCE bit
Instead of the external trigger, a software trigger can also be generated to output the pulse. When the software
(external trigger input)
One-shot pulse output mode (TPmMD2 to TPmMD0 bits = 011)
Note Because the external trigger input pin (TIPk0) and timer output pin (TOP00) share the same
Caution In the one-shot pulse output mode, select the internal clock as the count clock (by
Remark
TIPk0 pin
alternate-function pin, two functions cannot be used at the same time.
Note
clearing the TPkCTL1.TPkEEE bit to 0).
m = 0, 2, 3
k = 0, 2
Software trigger
Figure 6-27. Configuration in One-Shot Pulse Output Mode
selection
generation
Count
clock
detector
CHAPTER 6 16-BIT TIMER/EVENT COUNTER P (TMP)
Edge
TPmCE bit
User’s Manual U17716EJ2V0UD
control
Count
start
CCR1 buffer register
CCR0 buffer register
TPmCCR1 register
TPmCCR0 register
16-bit counter
Match signal
Match signal
Clear
Transfer
Transfer
S
R
controller
controller
Output
(RS-FF)
Output
INTTPmCC1 signal
INTTPmCC0 signal
TOPm1 pin
TOP00 pin
Note
199