UPD70F3714GC-8BS-A Renesas Electronics America, UPD70F3714GC-8BS-A Datasheet - Page 456

• Manufacturer Part Number: UPD70F3714GC-8BS-A
• Description: MCU 32BIT V850ES/LX2 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Ix2r

Specifications of UPD70F3714GC-8BS-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, UART/USART
• Peripherals: LVD, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

11.5.3 One-shot select mode operations
conversion results are stored in the ADAnCRm register. In the one-shot select mode, the 1-buffer mode and 4-buffer
mode are supported according to the method of storing the A/D conversion results.
454
In this mode, the analog input pin (ANInm) specified by the ADAnS register is A/D converted continuously. The
Remark
(1) 1-buffer mode (software trigger one-shot select: 1 buffer)
Remark
(1) The ADA0CE bit = 1 (enable)
(2) The ANI02 pin is A/D converted
(3) The conversion result is stored in the ADA0CR2 register
In this mode, the voltage of one analog input pin (ANInm) is A/D converted once. The conversion results are
stored in one ADAnCRm register. The ANInm pin and the ADAnCRm register correspond one to one.
Each time an A/D conversion is executed, an A/Dn conversion end interrupt request signal (INTADn) is
generated and A/D conversion ends. After the end of A/D conversion, the conversion operation is stopped.
If the ADAnM0.ADAnCE bit is set (1), A/D conversion can be restarted.
This mode is suitable for applications in which the results of each first-time A/D conversion are read.
Remark
Figure 11-13. Example of 1-Buffer Mode Operation (Software Trigger One-Shot Select: 1 Buffer)
ANInm
Analog Input Pin
n = 0, 1
m = 0 to 3
This is an operation example with the following setting.
ADA0M0.ADA0MD1 and ADA0M0.ADA0MD0 bits = 10, ADA0M0.ADA0TMD bit = 0,
ADA0M2.ADA0BS bit = 0, ADA0S.ADA0S1 and ADA0S.ADA0S0 bits = 10
ADA0M0
n = 0, 1
m = 0 to 3
ADAnCRm
A/D Conversion Result Register
ANI00
ANI01
ANI02
ANI03
CHAPTER 11 A/D CONVERTERS 0 AND 1
User’s Manual U17716EJ2V0UD
(4) The ADA0M0.ADA0EF bit = 0
(5) The INTAD0 interrupt request signal is generated
A/D converter 0
ADA0CR0
ADA0CR1
ADA0CR2
ADA0CR3