MCF5280CVM66 Freescale Semiconductor, MCF5280CVM66 Datasheet - Page 102

• Manufacturer Part Number: MCF5280CVM66
• Description: IC MPU 32BIT COLDF 256-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF528xr

Specifications of MCF5280CVM66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 142
• Program Memory Type: ROMless
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Controller Family/series: ColdFire
• No. Of I/o's: 150
• Program Memory Size: 2KB
• Ram Memory Size: 64KB
• Cpu Speed: 66.67MHz
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of Pwm Channels: 8
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Cache
4-4
26–25
19–11
CFRZ
Field
CPDI
CINV
DISD
INVD
CEIB
DISI
INVI
28
27
24
23
22
21
20
10
Disable CPUSHL invalidation. When the privileged CPUSHL instruction is executed, the cache entry defined by bits
[10:4] of the address is invalidated if CPDI is cleared. If CPDI is set, no operation is performed.
0 Enable invalidation
1 Disable invalidation
Cache freeze. This field allows the user to freeze the contents of the cache. When CFRZ is asserted line fetches can
be initiated and loaded into the line-fill buffer, but a valid cache entry can not be overwritten. If a given cache location
is invalid, the contents of the line-fill buffer can be written into the memory array while CFRZ is asserted.
0 Normal Operation
1 Freeze valid cache lines
Reserved, must be cleared.
Cache invalidate. The cache invalidate operation is not a function of the CENB state (this operation is independent
of the cache being enabled or disabled). Setting this bit forces the cache to invalidate all, half, or none of the tag array
entries depending on the state of the DISI, DISD, INVI, and INVD bits. The invalidation process requires several
cycles of overhead plus 128 machine cycles to clear all tag array entries and 64 cycles to clear half of the tag array
entries, with a single cache entry cleared per machine cycle. The state of this bit is always read as a zero. After a
hardware reset, the cache must be invalidated before it is enabled.
0 No operation
1 Invalidate all cache locations
Table 4-4
Disable instruction caching. When set, this bit disables instruction caching. This bit, along with the CENB (cache
enable) and DISD (disable data caching) bits, control the cache configuration. See the CENB definition for a detailed
description.
0 Enable instruction caching
1 Disable instruction caching
Table 4-3
Disable data caching. When set, this bit disables data caching. This bit, along with the CENB (cache enable) and
DISI (disable instruction caching) bits, control the cache configuration. See the CENB definition for a detailed
description.
0 Enable data caching
1 Disable data caching
Table 4-3
CINV instruction cache only. This bit can not be set unless the cache configuration is split (DISI and DISD cleared).
For instruction or data cache configurations this bit is a don’t-care. For the split cache configuration, this bit is part of
the control for the invalidate all operation. See the CINV definition for a detailed description
Table 4-4
CINV data cache only. This bit can not be set unless the cache configuration is split (DISI and DISD cleared). For
instruction or data cache configurations this bit is a don’t-care. For the split cache configuration, this bit is part of the
control for the invalidate all operation. See the CINV definition for a detailed description
Table 4-4
Reserved, must be cleared.
Cache enable non-cacheable instruction bursting. Setting this bit enables the line-fill buffer to be loaded with burst
transfers under control of CLNF[1:0] for non-cacheable accesses. Non-cacheable accesses are never written into
the memory array. See
0 Disable burst fetches on non-cacheable accesses
1 Enable burst fetches on non-cacheable accesses
describes how to set the cache invalidate all bit.
describes cache configuration and
describes cache configuration and
describes how to set the cache invalidate all bit.
describes how to set the cache invalidate all bit.
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
Table 4-2. CACR Field Descriptions (continued)
Table
4-7.
Table 4-4
Table 4-4
Description
describes how to set the cache invalidate all bit.
describes how to set the cache invalidate all bit.
Freescale Semiconductor