EVAL-ADAU1761Z Analog Devices Inc, EVAL-ADAU1761Z Datasheet - Page 49

• Manufacturer Part Number: EVAL-ADAU1761Z
• Description: Eval Board For ADAU1761
• Manufacturer: Analog Devices Inc
• Series: SigmaDSP®r

Specifications of EVAL-ADAU1761Z

• Main Purpose: Audio, CODEC
• Embedded: Yes, DSP
• Utilized Ic / Part: ADAU1761
• Primary Attributes: Stereo, 24-Bit, 8 ~ 96 kHz Sampling Rate, GUI Tool
• Secondary Attributes: I²C and GPIO Interfaces, 2 Differential and 1 Stereo Single-Ended Analog Inputs and Outputs
• Silicon Manufacturer: Analog Devices
• Core Architecture: SigmaDSP
• Silicon Core Number: ADAU1761
• Silicon Family Name: SigmaDSP
• Application Sub Type: Audio
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SOFTWARE SLEW
When the values of signal processing parameters are changed
abruptly in real time, they sometimes cause pop and click
sounds to appear on the audio outputs. To avoid pops and
clicks, some algorithms in SigmaStudio implement a software
slew functionality. Algorithms using software slew set a target
value for a parameter and continuously update the value of that
parameter until it reaches the target.
The target value takes an additional space in parameter RAM,
and the current value of the parameter is updated in the non-
modulo section of data RAM. Assignment of parameters and
nonmodulo data RAM is handled by the SigmaStudio compiler
and does not need to be programmed manually.
Slew parameters can follow several different curves, including
an RC-type curve and a linear curve. These curve types are
coded into each algorithm and cannot be modified by the user.
Rev. C | Page 49 of 92
Because algorithms that use software slew generally require more
RAM than their nonslew equivalents, they should be used only
in situations where a parameter will change during operation of
the device.
Figure 70 shows an example of volume slew applied to a sine wave.
INITIAL
VALUE
Figure 70. Example of Volume Slew
NEW TARGET
VALUE
CURVE
SLEW
ADAU1761