XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 21

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

xxii
Safety Precautions
• Do not apply voltages or connect loads to the built-in outputs in excess of
• Disconnect the functional ground terminal when performing withstand
• Wire correctly and double-check all the wiring or the setting switches
• Check that the DIP switches and data memory (DM) are properly set
• Check the user program for proper execution before actually running it on
• Resume operation only after transferring to the new Module the contents
• Do not pull on the cables or bend the cables beyond their natural limit.
• Do not place objects on top of the cables. Doing so may break the cables.
• Use the dedicated connecting cables specified in operation manuals to
• Do not connect pin 6 (+5V) on the RS-232C port on the Coordinator Mod-
• When replacing parts, be sure to confirm that the rating of a new part is
• When transporting or storing the product, cover the PCBs with electrically
• Do not touch the mounted parts or the rear surface of PCBs because
• When connecting the Power Supply Module, Coordinator Module, Motion
• Be sure to mount the End Module supplied with the Coordinator Module
• Make sure that parameters are set correctly. Incorrect parameter settings
the maximum switching capacity. Excess voltage or loads may result in
burning.
voltage tests. Not disconnecting the functional ground terminal may result
in burning.
before turning ON the power supply. Incorrect wiring may result in burn-
ing.
before starting operation.
the Module. Not checking the program may result in an unexpected oper-
ation.
of the DM Areas, programs, parameters, and data required for resuming
operation. Not doing so may result in an unexpected operation.
Doing either of these may break the cables.
connect the Modules. Using commercially available RS-232C computer
cables may cause failures in external devices or the Coordinator Module.
ule to any external device other than the NT-AL001 or CJ1W-CIF11 Con-
version Adapter. Doing so may result in damage to the external device
and the Coordinator Module.
correct. Not doing so may result in malfunction or burning.
conductive materials to prevent LSIs and ICs from being damaged by
static electricity, and also keep the product within the specified storage
temperature range.
PCBs have sharp edges such as electrical leads.
Control Module, End Module, I/O Unit, Special I/O Unit, or CPU Bus Unit,
slide the upper and lower latches until a click sound is heard to lock them
securely. Desired functionality may not be achieved unless Modules are
securely locked in place.
to the rightmost Module. Unless the End Module is properly mounted, the
FQM1 will not function properly.
may result in unexpected operations. Make sure that equipment will not
be adversely affected by the parameter settings before starting or stop-
ping the FQM1.
3