XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 240

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

Monitoring a High-speed
Counter’s Frequency
(Mode 2)
Pulse Inputs
Note
The pulse input’s counter data display must be set to counter movements
(mode 1) in the System Setup in advance. The sampling period must also be
set in the System Setup.
High-speed Counter Movement (Mode 1) Specifications
Mode 2 is supported by high-speed counter 1 only.
A858
A859
Pulse input
Applicable pulse
input
Displayable move-
ment
Sampling time
Operating conditions In the System Setup, set the pulse input’s counter data display
(1) When using mode 1 with a circular counter, set the maximum circular val-
(2) In mode 1, the Motion Control Module outputs the change as the differ-
Word
Tab page
ue to 10 or higher.
ence in the count measured each sampling period. The output change
varies, so determine how to manage the output value in the user program
when the counter is reset or the INI(880) instruction is executed to
change the PV during sampling.
Item
06
06
Bits
Counter 1
Counter 2
Either pulse 1 (high-speed counter 1) or pulse 2 (high-speed
counter 2) can be used.
0000 0000 to FFFF FFFF
Note The software can generate the range of values shown
Can be set to the cycle time or a fixed time between 1 and
9,999 ms.
to counter movements (mode 1) and specify the sampling
time.
High-speed Counter 1
Status Flag
High-speed Counter 2
Status Flag
Function
above, but some hardware may not be able to display
the full range due to input limitations.
Function
Counter data
display
Sampling time
(mode 1)
Counter data
display
Sampling time
(mode 1)
Specifications
Measuring Flag
OFF: The high-speed counter move-
ON:
Measuring Flag
OFF: The high-speed counter move-
ON:
1 hex:
Counter movements (mode 1)
Set the sampling time when mea-
suring counter movement.
0000: Cycle time
0001 to 270F hex: 1 to 9999 ms
(unit: 1 ms)
1 hex:
Counter movements (mode 1)
Set the sampling time when mea-
suring counter movement.
0000: Cycle time
0001 to 270F hex: 1 to 9999 ms
(unit: 1 ms)
ment measurement operation
is stopped.
ment is being measured.
ment measurement operation
is stopped.
ment is being measured.
The high-speed counter move-
The high-speed counter move-
Details
Details
Section 7-5
213