XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 40

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

No-protocol (Custom)
Communications
System via RS-232C
Port
NT Link System
(1:N Mode, Standard)
Expanded System Configuration
No-protocol communications allow simple data transmissions, such as input-
ting bar code data and outputting printer data using communications port I/O
instructions TXD(236) and RXD(235). The start and end codes can be set
and, RS and CS signal control is also possible with no-protocol communica-
tions.
If the FQM1 and a Programmable Terminal (PT) are connected together using
the RS-232C port, the allocations for the PT’s status control area, status notify
area, objects such as touch switches, indicators, and memory maps can be
allocated in the I/O memory of the FQM1.
The NT Link System allows the PT to be controlled by the FQM1, and the PT
can periodically read data from the status control area of the FQM1, and per-
form necessary operations if there are any changes in the area. The PT can
communicate with the FQM1 by writing data to the status notify area of the
FQM1 from the PT. The NT Link System allows the PT status to be controlled
and monitored without using FQM1 ladder programming. The ratio of FQM1
Controllers to PTs is 1: n (n
Set the PT communications settings for a 1:N or Standard NT Link. An NT
Link System is possible for either the peripheral port or the RS-232C port.
Coordinator Module
RXD(235) instruction
TXD(236) instruction
RS-232C
1).
Note Set the serial communications
Applicable Ports
Peripheral
Coordinator Module
No
mode in the System Setup to
"non-procedural."
RS-232C
Yes
RS-422A
Yes
Section 1-5
13