XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 89

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

Motion Control Modules
62
Auxiliary
Area
Temporary Area
Holding Area
Timer Area
Counter Area
DM Area
System Setup
FB Address
Allocation
Areas
Index Registers
Data Registers
Interrupt
Functions
Power interruption hold function
(momentary power interruption)
Memory backup
Trace memory
Peripheral servicing
Self-diagnosis function
Program check
Super-capacitor backup time
Clock
Individual
functions
Read/Write
Error Log
Read/write (not
retained)
Read/write
(retained)
CIO Area
Timers
Counters
Input interrupts
Timer interrupts
High-speed
counters
High-speed pulse
outputs
High-speed
counters
Analog input
Analog outputs
Item
CPU errors (WDT) and memory errors
Read-only: 7,168 bits: A000 to A447
Read/write: 8,192 bits: A448 to A959
100 words: A100 to A199 (20 records)
16 bits: TR0 to TR15
None
256 timers: T0000 to T0255 (1-ms, 10-ms, and 100-ms timers)
256 counters C0000 to C0255 (decrementing counters and reversible counters)
Note Status not retained when power turned OFF.
30,000 words: D00000 to D29999 (Status not retained when power is turned OFF.)
This data can be saved to flash memory using a bit operation, and a parameter in the
system settings can be set to automatically restore the DM Area data from flash mem-
ory when power is turned ON.
2,768 words: D30000 to D32767 (Retained by super capacitor.)
System Setup Area (Coordinator Module/Motion Control Module settings),
motion parameter setting area
16,000 bits (1,000 words): CIO 5000 to CIO 5999
50 bits: T0206 to T0255
50 bits: C0206 to C0255
IR0 to IR15 (IR0 and IR1 are used with JSB instruction.)
Note IR16 to IR63 are used by the system for function blocks/structured text.
DR0 to DR15
Note IR16 to IR63 are used by the system for function blocks/structured text.
4 (with adjustment down mode)
1(Scheduled or one-shot interrupt)
Super capacitor
Super capacitor backup
Flash memory
4,000 words
Event requests from Coordinator Module
Programs checked from the CX-Programmer.
Approximately 100 hours at 25 C
None
Phase pulse inputs, Up/down pulse inputs, Pulse + direction pulse
inputs (50 kHz/1 MHz)
Phase differential inputs (50 kHz/500 kHz; phase differential
2 MHz)
CW and CCW (1 MHz: Line-driver)
One-shot pulse output
Single phase pulse inputs/Up/down pulse inputs /Pulse + direction
pulse inputs (50 kHz/1 MHz)
Phase differential inputs (50 kHz/500 kHz; phase differential
2 MHz)
Conversion speed: 40 s/input
Resolution: 10 to 10 V: 1/16,000; 0 to 10 V: 1/8,000; 0 to 5 V: 1/4,000;
1 to 5 V: 1/4,000; 4 to 20 mA: 1/4,000
Conversion speed: 40 s/output
Resolution: 10 to 10 V: 1/10,000; 0 to 10 V/0 to 5 V/1 to 5 V: 1/4,000
Error log, part of DM Area (backup for momentary power
interruptions)
User programs, System Setup (part of DM Area (via con-
trol bit))
Specifications
4,
4,
Section 2-4
FQM1-MMP22
(pulse I/O)
FQM1-MMA22
(analog I/O)