ATmega169P Automotive Atmel Corporation, ATmega169P Automotive Datasheet - Page 35

• Manufacturer Part Number: ATmega169P Automotive
• Manufacturer: Atmel Corporation

Specifications of ATmega169P Automotive

• Flash (kbytes): 16 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 54
• Ext Interrupts: 17
• Usb Speed: No
• Usb Interface: No
• Spi: 2
• Twi (i2c): 1
• Uart: 1
• Segment Lcd: 100
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 1
• Eeprom (bytes): 512
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: Yes
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 3
• Output Compare Channels: 4
• Input Capture Channels: 1
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

7735B–AVR–12/07
Figure 7-3.
Table 7-8.
Crystals specifying load capacitance (CL) higher than 6.5 pF, require external capacitors applied
as described in
To find suitable load capacitance for a 32.768 kHz crystal, please consult the crystal datasheet.
The Low-frequency Crystal Oscillator must be selected by setting the CKSEL Fuses to “0110” or
“0111” as shown in
Table
Table 7-9.
Table 7-10.
Note:
CKSEL3..0
SUT1..0
0110
0111
00
01
10
11
7-9..
(1)
1. This option should only be used if frequency stability at start-up is not important for the
application
Typ. (pF)
6.5
Crystal Oscillator Connections
Low-frequency Crystal Oscillator Internal load Capacitance
Start-up Times for the Low-frequency Crystal Oscillator Clock Selection
Start-up Times for the Low-frequency Crystal Oscillator Clock Selection
Additional Delay from Reset (V
Figure 7-2 on page
Power-down and Power-save
Table
Start-up Time from
7-10. Start-up times are determined by the SUT Fuses as shown in
14 CK + 65 ms
14 CK + 4 ms
32K CK
1K CK
14 CK
33.
CC
ATmega169P Automotive
= 5.0V)
XTAL2 (TOSC2)
XTAL1 (TOSC1)
Reserved
Recommended Usage
Fast rising power or BOD enabled
Slowly rising power
Stable frequency at start-up
Recommended Usage
Stable frequency at start-up
35