LAN9303MI-AKZE Standard Microsystems (SMSC), LAN9303MI-AKZE Datasheet - Page 202

• Manufacturer Part Number: LAN9303MI-AKZE
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9303MI-AKZE

• Lead Free Status / Rohs Status: Compliant

Revision 1.4 (07-07-10)
BITS
6:0
7
Collision Test
This bit enables/disables the collision test mode. When set, the collision
signal to the external MAC is active during transmission from the external
MAC.
Note:
0: Collision test mode disabled
1: Collision test mode enabled
Note:
RESERVED
Note 13.56 The default value of this field is determined via the
Note 13.57 The default value of this field is determined via the
Note 13.58 The default value of this field is determined via the
Note 13.59 The default value of this field is determined via the
Note 13.60 The default value of this field is determined via the
Note 13.61 The default value of this field is determined via the
Note 13.62 The default value of this field is determined as follows:
It is recommended that this bit be used only when in loopback
mode.
This bit is used when Port 1 is in MII PHY mode. It is not usable
in internal PHY, RMII PHY, or MII MAC mode.
strap. Refer to
straps. Refer to
information.
strap. Refer to
strap. Refer to
configuration strap. Refer to
additional information.
Refer to
1 if
0 if
duplex_pol_strap_1
duplex_pol_strap_1
Section 4.2.4, "Configuration Straps," on page 51
Section 4.2.4, "Configuration Straps," on page 51
Section 4.2.4, "Configuration Straps," on page 51
Section 4.2.4, "Configuration Straps," on page 51
DESCRIPTION
Small Form Factor Three Port 10/100 Managed Ethernet Switch with Dual MII/RMII/Turbo MII
Section 4.2.4, "Configuration Straps," on page 51
DATASHEET
= P1_DUPLEX
!= P1_DUPLEX.
202
Section 4.2.4, "Configuration Straps," on page 51
turbo_mii_enable_strap_1
P1_clock_strength_strap
P1_rmii_clock_dir_strap
speed_strap_1
P1_mode_strap[1:0]
for additional information.
SMSC LAN9303M/LAN9303Mi
SQE_test_disable_strap_1
for additional information.
for additional information.
for additional information.
TYPE
R/W
RO
configuration strap.
for additional
DEFAULT
configuration
configuration
configuration
configuration
Datasheet
0b
-
for