dsPIC33FJ32GP104-I/PT Microchip Technology, dsPIC33FJ32GP104-I/PT Datasheet - Page 31

• Manufacturer Part Number: dsPIC33FJ32GP104-I/PT
• Description: Digital Signal Processors & Controllers - DSP, DSC 16bit Gen Prp Fam16 MIPS 32KBFLSH 2KBRAM
• Manufacturer: Microchip Technology
• Type: dsPIC33FJ32(GP/MC)101/102/104r

Specifications of dsPIC33FJ32GP104-I/PT

• Rohs: yes
• Core: dsPIC33F
• Data Bus Width: 16 bit
• Program Memory Size: 32 KB
• Data Ram Size: 2 KB
• Maximum Clock Frequency: 7.37 MHz, 32 kHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5 x 16-bit, 2 x 32-bit
• Device Million Instructions Per Second: 16 MIPs
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Package / Case: TQFP-44
• Mounting Style: SMD/SMT
• Family / Core: dsPIC33FJ32(GP/MC)101/102/104
• Interface Type: I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: Yes
• Product: DSPs
• Program Memory Type: Flash
• Supply Current: 10 mA

TABLE 1-1:
 2011-2012 Microchip Technology Inc.
AV
AV
V
V
V
Legend: CMOS = CMOS compatible input or output
Note 1:
Pin Name
DD
CAP
SS
DD
SS
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
2:
3:
4:
5:
6:
ST = Schmitt Trigger input with CMOS levels
PPS = Peripheral Pin Select
An external pull-down resistor is required for the FLTA1 pin on dsPIC33FJXXMC101 (20-pin) devices.
The FLTA1 pin and the PWM1Lx/PWM1Hx pins are available in dsPIC(16/32)MC10X devices only.
The FLTB1 pin is available in dsPIC(16/32)MC102/104 devices only.
The PWM Fault pins are enabled during any Reset event. Refer to
information on the PWM Faults.
Not all pins are available on all devices. Refer to the specific device in the
availability.
This pin is available in dsPIC33FJ32(GP/MC)104 (44-pin) devices only.
Type
Pin
P
P
P
P
P
PINOUT I/O DESCRIPTIONS (CONTINUED)
Buffer
Type
—
—
—
P
P
PPS
No
No
No
No
No
Positive supply for analog modules. This pin must be connected at all times.
AV
dsPIC33FJXXMC101 devices. In all other devices, AV
V
Ground reference for analog modules. AV
18-pin dsPIC33FJXXGP101 and 20-pin dsPIC33FJXXMC101 devices. In all
other devices, AV
Positive supply for peripheral logic and I/O pins.
CPU logic filter capacitor connection.
Ground reference for logic and I/O pins.
DD
DD
.
is connected to V
SS
is separated from V
DD
Analog = Analog input
O = Output
in the 18-pin dsPIC33FJXXGP101 and 20-pin
Description
Section 15.2 “PWM Faults”
SS
SS
.
is connected to V
“Pin Diagrams”
P = Power
I = Input
DD
is separated from
DS70652E-page 31
SS
section for
in the
for more