PIC18F27J13-I/SP Microchip Technology, PIC18F27J13-I/SP Datasheet - Page 111

• Manufacturer Part Number: PIC18F27J13-I/SP
• Description: IC PIC MCU 128KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/SP

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: DIP
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Core: PIC
• Processor Series: PIC18F
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 48 MHz
• Data Ram Size: 3.76 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 2
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• A/d Bit Size: 12 bit
• A/d Channels Available: 10
• Height: 3.43 mm
• Interface Type: I2C, SPI, USART
• Length: 34.4 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.15 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

8.0
8.1
All PIC18 devices include an 8 x 8 hardware multiplier
as part of the ALU. The multiplier performs an unsigned
operation and yields a 16-bit result that is stored in the
product register pair, PRODH:PRODL. The multiplier’s
operation does not affect any flags in the STATUS
register.
Making multiplication a hardware operation allows it to
be completed in a single instruction cycle. This has the
advantages of higher computational throughput and
reduced code size for multiplication algorithms and
allows the PIC18 devices to be used in many applica-
tions previously reserved for digital signal processors.
A comparison of various hardware and software
multiply operations, along with the savings in memory
and execution time, is shown in
8.2
Example 8-1
unsigned multiplication. Only one instruction is required
when one of the arguments is already loaded in the
WREG register.
Example 8-2
multiplication. To account for the sign bits of the
arguments, each argument’s Most Significant bit (MSb)
is tested and the appropriate subtractions are done.
TABLE 8-1:
 2010 Microchip Technology Inc.
8 x 8 unsigned
8 x 8 signed
16 x 16 unsigned
16 x 16 signed
Routine
8 x 8 HARDWARE MULTIPLIER
Introduction
Operation
shows the instruction sequence for an 8 x 8
shows the sequence to do an 8 x 8 signed
PERFORMANCE COMPARISON FOR VARIOUS MULTIPLY OPERATIONS
Without hardware multiply
Hardware multiply
Without hardware multiply
Hardware multiply
Without hardware multiply
Hardware multiply
Without hardware multiply
Hardware multiply
Multiply Method
Table
8-1.
Program
Memory
(Words)
Preliminary
13
33
21
28
52
35
1
6
Cycles
(Max)
242
254
69
91
28
40
EXAMPLE 8-1:
EXAMPLE 8-2:
1
6
MOVF
MULWF
MOVF
MULWF
BTFSC
SUBWF
MOVF
BTFSC
SUBWF
PIC18(L)F2X/4XK22
@ 64 MHz @ 40 MHz @ 10 MHz @ 4 MHz
62.5 ns
15.1 s
15.9 s
375 ns
4.3 s
5.7 s
1.8 s
2.5 s
ARG1, W
ARG2
ARG1, W
ARG2
ARG2, SB
PRODH, F
ARG2, W
ARG1, SB
PRODH, F
24.2 s
25.4 s
100 ns
600 ns
6.9 s
9.1 s
2.8 s
4.0 s
8 x 8 UNSIGNED
MULTIPLY ROUTINE
8 x 8 SIGNED MULTIPLY
ROUTINE
;
; ARG1 * ARG2 ->
; PRODH:PRODL
; ARG1 * ARG2 ->
; PRODH:PRODL
; Test Sign Bit
; PRODH = PRODH
;
; Test Sign Bit
; PRODH = PRODH
;
Time
102.6 s
27.6 s
36.4 s
96.8 s
16.0 s
11.2 s
400 ns
2.4 s
DS41412D-page 111
- ARG1
- ARG2
242 s
254 s
69 s
91 s
28 s
40 s
1 s
6 s