PIC18F27J13-I/SP Microchip Technology, PIC18F27J13-I/SP Datasheet - Page 250

• Manufacturer Part Number: PIC18F27J13-I/SP
• Description: IC PIC MCU 128KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/SP

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: DIP
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Core: PIC
• Processor Series: PIC18F
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 48 MHz
• Data Ram Size: 3.76 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 2
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• A/d Bit Size: 12 bit
• A/d Channels Available: 10
• Height: 3.43 mm
• Interface Type: I2C, SPI, USART
• Length: 34.4 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.15 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18(L)F2X/4XK22
FIGURE 15-34:
FIGURE 15-35:
DS41412D-page 250
SDAx
SCLx
SEN
BCLxIF
S
SSPxIF
S
BCLxIF
SSPxIF
SDAx
SCLx
SEN
BUS COLLISION DURING START CONDITION (SCLx = 0)
BRG RESET DUE TO SDA ARBITRATION DURING START CONDITION
’0’
’0’
SDAx pulled low by other master.
Reset BRG and assert SDAx.
SCLx = 0 before BRG time-out,
bus collision occurs. Set BCLxIF.
Set SEN, enable Start
sequence if SDAx = 1, SCLx = 1
Less than T
BRG
SDAx = 0, SCLx = 1
SDAx = 0, SCLx = 1
Preliminary
SDAx = 0, SCLx = 1,
set SSPxIF
T
Set SEN, enable Start
sequence if SDAx = 1, SCLx = 1
BRG
S
Set S
T
BRG
T
BRG
Set SSPxIF
SCLx = 0 before SDAx = 0,
bus collision occurs. Set BCLxIF.
SCLx pulled low after BRG
time-out
Interrupt cleared
by software
Interrupts cleared
by software
 2010 Microchip Technology Inc.
’0’
’0’
’0’