PIC18F27J13-I/SP Microchip Technology, PIC18F27J13-I/SP Datasheet - Page 300

• Manufacturer Part Number: PIC18F27J13-I/SP
• Description: IC PIC MCU 128KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/SP

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: DIP
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Core: PIC
• Processor Series: PIC18F
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 48 MHz
• Data Ram Size: 3.76 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 2
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• A/d Bit Size: 12 bit
• A/d Channels Available: 10
• Height: 3.43 mm
• Interface Type: I2C, SPI, USART
• Length: 34.4 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.15 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18(L)F2X/4XK22
REGISTER 17-3:
DS41412D-page 300
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5-3
bit 2-0
Note 1:
ADFM
R/W-0
When the A/D clock source is selected as F
cycle after the GO/DONE bit is set to allow the SLEEP instruction to be executed.
ADFM: A/D Conversion Result Format Select bit
1 = Right justified
0 = Left justified
Unimplemented: Read as ‘0’
ACQT<2:0>: A/D Acquisition time select bits. Acquisition time is the duration that the A/D charge hold-
ing capacitor remains connected to A/D channel from the instant the GO/DONE bit is set until conver-
sions begins.
000 = 0
001 = 2 T
010 = 4 T
011 = 6 T
100 = 8 T
101 = 12 T
110 = 16 T
111 = 20 T
ADCS<2:0>: A/D Conversion Clock Select bits
000 = F
001 = F
010 = F
011 = F
100 = F
101 = F
110 = F
111 = F
U-0
—
ADCON2: A/D CONTROL REGISTER 2
(1)
OSC
OSC
OSC
RC
OSC
OSC
OSC
RC
AD
AD
AD
AD
(1)
(1)
AD
AD
AD
/2
/8
/32
/4
/16
/64
(clock derived from a dedicated internal oscillator = 600 kHz nominal)
(clock derived from a dedicated internal oscillator = 600 kHz nominal)
W = Writable bit
‘1’ = Bit is set
R/W-0
ACQT<2:0>
R/W-0
Preliminary
RC
then the start of conversion is delayed by one instruction
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
R/W-0
 2010 Microchip Technology Inc.
x = Bit is unknown
ADCS<2:0>
R/W-0
R/W-0
bit 0