PIC18F27J13-I/SP Microchip Technology, PIC18F27J13-I/SP Datasheet - Page 324

• Manufacturer Part Number: PIC18F27J13-I/SP
• Description: IC PIC MCU 128KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/SP

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: DIP
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Core: PIC
• Processor Series: PIC18F
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 48 MHz
• Data Ram Size: 3.76 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 2
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• A/d Bit Size: 12 bit
• A/d Channels Available: 10
• Height: 3.43 mm
• Interface Type: I2C, SPI, USART
• Length: 34.4 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.15 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18(L)F2X/4XK22
EXAMPLE 19-3:
DS41412D-page 324
#include "p18cxxx.h"
#define COUNT 25
#define ETIME COUNT*2.5
#define DELAY for(i=0;i<COUNT;i++)
#define ADSCALE 1023
bits
#define ADREF 3.3
#define RCAL .027
int main(void)
{
//assume CTMU and A/D have been set up correctly
//see Example 25-1 for CTMU & A/D setup
setup();
CTMUCONHbits.CTMUEN = 1;
CTMUCONLbits.EDG1STAT = 0;
CTMUCONLbits.EDG2STAT = 0;
}
int i;
int j = 0;
unsigned int Vread = 0;
float CTMUISrc, CTMUCap, Vavg, VTot, Vcal;
for(j=0;j<10;j++)
{
}
Vavg = (float)(VTot/10.000);
Vcal = (float)(Vavg/ADSCALE*ADREF);
CTMUISrc = Vcal/RCAL;
CTMUCap = (CTMUISrc*ETIME/Vcal)/100;
CTMUCONHbits.IDISSEN = 1;
DELAY;
CTMUCONHbits.IDISSEN = 0;
CTMUCONLbits.EDG1STAT = 1;
DELAY;
CTMUCONLbits.EDG1STAT = 0;
PIR1bits.ADIF = 0;
ADCON0bits.GO=1;
while(!PIR1bits.ADIF);
Vread = ADRES;
PIR1bits.ADIF = 0;
VTot += Vread;
CAPACITANCE CALIBRATION ROUTINE
Preliminary
//@ 8MHz INTFRC = 62.5 us.
//time in uS
//for unsigned conversion 10 sig
//Vdd connected to A/D Vr+
//R value is 4200000 (4.2M)
//scaled so that result is in
//1/100th of uA
//index for loop
//Enable the CTMU
// Set Edge status bits to zero
//drain charge on the circuit
//wait 125us
//end drain of circuit
//Begin charging the circuit
//using CTMU current source
//wait for 125us
//Stop charging circuit
//make sure A/D Int not set
//and begin A/D conv.
//Wait for A/D convert complete
//Get the value from the A/D
//Clear A/D Interrupt Flag
//Add the reading to the total
//Average of 10 readings
//CTMUISrc is in 1/100ths of uA
 2010 Microchip Technology Inc.