LPC3230FET296,551 NXP Semiconductors, LPC3230FET296,551 Datasheet - Page 27

IC ARM9 MCU 256K 296-TFBGA

LPC3230FET296,551

Manufacturer Part Number
LPC3230FET296,551
Description
IC ARM9 MCU 256K 296-TFBGA
Manufacturer
NXP Semiconductors
Series
LPC32x0r
Datasheet

Specifications of LPC3230FET296,551

Core Processor
ARM9
Core Size
16/32-Bit
Speed
266MHz
Connectivity
EBI/EMI, I²C, IrDA, Microwire, SPI, SSI, SSP, UART/USART, USB OTG
Peripherals
DMA, I²S, LCD, Motor Control PWM, PWM, WDT
Number Of I /o
51
Program Memory Type
ROMless
Ram Size
256K x 8
Voltage - Supply (vcc/vdd)
0.9 V ~ 3.6 V
Data Converters
A/D 3x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
296-TFBGA
Processor Series
LPC32
Core
ARM926EJ-S
Data Bus Width
32 bit
Data Ram Size
256 KB
Interface Type
I2C, I2S, UART, USB
Maximum Clock Frequency
20 MHz
Number Of Programmable I/os
51
Number Of Timers
6
Operating Supply Voltage
2.7 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
MDK-ARM, RL-ARM, ULINK2
Minimum Operating Temperature
- 40 C
On-chip Adc
10 bit, 8 Channel
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Program Memory Size
-
Lead Free Status / Rohs Status
 Details
Other names
568-4531
935287119551

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LPC3230FET296,551
Manufacturer:
NXP Semiconductors
Quantity:
10 000
NXP Semiconductors
LPC3220_30_40_50_1
Product data sheet
7.5.1.1 Multi-Level Cell (MLC) NAND flash controller
7.4.1 On-chip ROM
7.4.2 On-chip SRAM
7.5.1 NAND flash controllers
7.4 Internal memory
7.5 External memory interfaces
The built-in 16 kB ROM contains a program which runs a boot procedure to load code
from one of four external sources, UART5, SSP0 (SPI mode), EMC Static CS0 memory,
or NAND FLASH.
After reset, execution always begins from the internal ROM. The bootstrap software first
reads the SERVICE input (GPI_1). If SERVICE is LOW, the bootstrap starts a service boot
and can download a program over serial link UART5 to IRAM and transfer execution to
the downloaded code.
If the SERVICE pin is HIGH, the bootstrap routine jumps to normal boot. The normal boot
process first tests SPI memory for boot information if present it uploads the boot code and
transfers execution to the uploaded software. If the SPI is not present or no software is
loaded, the bootloader will test the EMC Static CS0 memory for the presence of boot code
and if present boots from static memory, If this test fails the boot loader will test external
NAND flash for boot code and boot if code is present.
The boot loader consumes no user memory space because it is in ROM.
On-chip SRAM may be used for code and/or data storage. The SRAM may be accessed
as 8, 16, or 32 bit memory. The LPC3220/30/40/50 provides 256 kB of internal SRAM.
The LPC3220/30/40/50 includes three external memory interfaces, NAND Flash
controllers, Secure Digital Memory Controller, and an external memory controller for
SDRAM, DDR SDRAM, and Static Memory devices.
The LPC3220/30/40/50 includes two NAND flash controllers, one for multi-level cell
NAND flash devices and one for single-level cell NAND flash devices. The two NAND
flash controllers use the same pins to interface to external NAND flash devices, so only
one interface is active at a time.
The MLC NAND flash controller interfaces to either multi-level or single-level NAND flash
devices. An external NAND flash device is used to allow the bootloader to automatically
load a portion of the application code into internal SRAM for execution following reset.
The MLC NAND flash controller supports small (528 byte) and large (2114 byte) pages.
Programmable NAND timing parameters allow support for a variety of NAND flash
devices. A built-in Reed-Solomon encoder/decoder provides error detection and
correction capability. A 528 byte data buffer reduces the need for CPU supervision during
loading. The MLC NAND flash controller also provides DMA support.
All information provided in this document is subject to legal disclaimers.
Rev. 01.03 — 16 March 2010
LPC3220/30/40/50
16/32-bit ARM microcontrollers
© NXP B.V. 2010. All rights reserved.
27 of 77

Related parts for LPC3230FET296,551