LPC3230FET296,551 NXP Semiconductors, LPC3230FET296,551 Datasheet - Page 39

• Manufacturer Part Number: LPC3230FET296,551
• Description: IC ARM9 MCU 256K 296-TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC32x0r

Specifications of LPC3230FET296,551

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 266MHz
• Connectivity: EBI/EMI, I²C, IrDA, Microwire, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: DMA, I²S, LCD, Motor Control PWM, PWM, WDT
• Number Of I /o: 51
• Program Memory Type: ROMless
• Ram Size: 256K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 3.6 V
• Data Converters: A/D 3x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 296-TFBGA
• Processor Series: LPC32
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 256 KB
• Interface Type: I2C, I2S, UART, USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 51
• Number Of Timers: 6
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4531; 935287119551

NXP Semiconductors
LPC3220_30_40_50_1
Product data sheet
7.9.1.1 Features
7.9.1 General purpose parallel I/O
7.9 Other peripherals
In addition to the communication peripherals there are many general purpose peripherals
available in the LPC3220/30/40/50. Here is a list of the general purpose peripherals.
A short functional description of each of these peripherals is provided in the following
sections.
Some device pins that are not dedicated to a specific peripheral function have been
designed to be general purpose inputs, outputs, or input/outputs. Also, some pins may be
configured either as a specific peripheral function or a general purpose input, output, or
input/output. A total of 51 pins can potentially be used as general purpose input/outputs,
24 as general purpose outputs, and 22 as general purpose inputs.
GPIO pins may be dynamically configured as inputs or outputs. Separate registers allow
setting or clearing any number of GPIO and GPO outputs controlled by that register
simultaneously. The value of the output register for standard GPIOs and GPO pins may
be read back, as well as the current actual state of the port pins.
In addition to GPIO pins on port 0, port 1, and port 2, there are 22 GPI, 24 GPO, and
six GPIO pins. When the SDRAM bus is configured for 16 data bits, 13 of the remaining
SDRAM data pins may be used as GPIOs.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
GPI/O
Keyboard scanner
Touch screen controller and 10-bit Analog-to-Digital-Converter
Real-time clock
High-speed timer
Four general purpose 32-bit timer/external event counters
Two simple PWMs
One motor control PWM
Bit-level set and clear registers allow a single instruction set or clear of any number of
bits in one port.
A single register selects direction for pins that support both input and output modes.
Direction control of individual bits.
For input/output pins, both the programmed output state and the actual pin state can
be read.
There are a total of 12 general purpose inputs, 24 general purpose outputs, and six
general purpose input/outputs.
Additionally, 13 SDRAM data lines may be used as GPIOs if a 16-bit SDRAM
interface is used (rather than a 32-bit interface).
All information provided in this document is subject to legal disclaimers.
Rev. 01.03 — 16 March 2010
LPC3220/30/40/50
16/32-bit ARM microcontrollers
© NXP B.V. 2010. All rights reserved.
39 of 77