AT91M55800A-33CJ Atmel, AT91M55800A-33CJ Datasheet - Page 11

• Manufacturer Part Number: AT91M55800A-33CJ
• Description: IC ARM MCU 16BIT 176BGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91M55800A-33CJ

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SPI, UART/USART
• Peripherals: POR, WDT
• Number Of I /o: 58
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 176-LFBGA
• Processor Series: AT91Mx
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: EBI, SPI, USART
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 58
• Number Of Timers: 10 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91EB55
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 8 bit, 2 Channel
• Cpu Family: AT91
• Device Core: ARM7TDMI
• Device Core Size: 32b
• Frequency (max): 33MHz
• Program Memory Size: Not Required
• Total Internal Ram Size: 8KB
• # I/os (max): 58
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 2.7V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 176
• Package Type: BGA
• For Use With: AT91EB55 - KIT EVAL FOR ARM AT91M55800A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5.2.2
1745F–ATARM–06-Sep-07
User Peripherals
The Real-time Clock (RTC) peripheral is designed for very low power consumption, and com-
bines a complete time-of-day clock with alarm and a two-hundred year Gregorian calendar,
complemented by a programmable periodic interrupt.
The Parallel Input/Output Controllers (PIOA and PIOB) control the 58 I/O lines. They enable the
user to select specific pins for on-chip peripheral input/output functions, and general-purpose
input/output signal pins. The PIO controllers can be programmed to detect an interrupt on a sig-
nal change from each line.
The Watchdog (WD) can be used to prevent system lock-up if the software becomes trapped in
a deadlock.
The Special Function (SF) module integrates the Chip ID and Reset Status registers.
Three USARTs, independently configurable, enable communication at a high baud rate in syn-
chronous or asynchronous mode. The format includes start, stop and parity bits and up to 8 data
bits. Each USART also features a Timeout and a Time Guard Register, facilitating the use of the
two dedicated Peripheral Data Controller (PDC) channels.
The six 16-bit Timer/Counters (TC) are highly programmable and support capture or waveform
modes. Each TC channel can be programmed to measure or generate different kinds of waves,
and can detect and control two input/output signals. Each TC also has three external clock
signals.
The SPI provides communication with external devices in master or slave mode. It has four
external chip selects which can be connected to up to 15 devices. The data length is program-
mable, from 8- to 16-bits.
The two identical 4-channel 10-bit analog-to-digital converters (ADC) are based on a Successive
Approximation Register (SAR) approach.
AT91M5880A
11