AT91M55800A-33CJ Atmel, AT91M55800A-33CJ Datasheet - Page 168

• Manufacturer Part Number: AT91M55800A-33CJ
• Description: IC ARM MCU 16BIT 176BGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91M55800A-33CJ

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SPI, UART/USART
• Peripherals: POR, WDT
• Number Of I /o: 58
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 176-LFBGA
• Processor Series: AT91Mx
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: EBI, SPI, USART
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 58
• Number Of Timers: 10 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91EB55
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 8 bit, 2 Channel
• Cpu Family: AT91
• Device Core: ARM7TDMI
• Device Core Size: 32b
• Frequency (max): 33MHz
• Program Memory Size: Not Required
• Total Internal Ram Size: 8KB
• # I/os (max): 58
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 2.7V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 176
• Package Type: BGA
• For Use With: AT91EB55 - KIT EVAL FOR ARM AT91M55800A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

19.3
19.3.1
19.3.2
19.3.3
168
Capture Operating Mode
AT91M5880A
Capture Registers A and B (RA and RB)
Trigger Conditions
Status Register
This mode is entered by clearing the WAVE parameter in TC_CMR (Channel Mode Register).
Capture Mode allows the TC Channel to perform measurements such as pulse timing, fre-
quency, period, duty cycle and phase on TIOA and TIOB signals which are considered as input.
Figure 19-4 shows the configuration of the TC Channel when programmed in Capture Mode.
Registers A and B are used as capture registers. This means that they can be loaded with the
counter value when a programmable event occurs on the signal TIOA.
The parameter LDRA in TC_CMR defines the TIOA edge for the loading of register A, and the
parameter LDRB defines the TIOA edge for the loading of Register B.
RA is loaded only if it has not been loaded since the last trigger or if RB has been loaded since
the last loading of RA.
RB is loaded only if RA has been loaded since the last trigger or the last loading of RB.
Loading RA or RB before the read of the last value loaded sets the Overrun Error Flag (LOVRS)
in TC_SR (Status Register). In this case, the old value is overwritten.
In addition to the SYNC signal, the software trigger and the RC compare trigger, an external trig-
ger can be defined.
Bit ABETRG in TC_CMR selects input signal TIOA or TIOB as an external trigger. Parameter
ETRGEDG defines the edge (rising, falling or both) detected to generate an external trigger. If
ETRGEDG = 0 (none), the external trigger is disabled.
The following bits in the status register are significant in Capture Operating Mode:
• CPCS: RC Compare Status
• COVFS: Counter Overflow Status
• LOVRS: Load Overrun Status
• LDRAS: Load RA Status
• LDRBS: Load RB Status
• ETRGS: External Trigger Status
There has been an RC Compare match at least once since the last read of the status
The counter has attempted to count past $FFFF since the last read of the status
RA or RB has been loaded at least twice without any read of the corresponding register,
since the last read of the status
RA has been loaded at least once without any read, since the last read of the status
RB has been loaded at least once without any read, since the last read of the status
An external trigger on TIOA or TIOB has been detected since the last read of the status
1745F–ATARM–06-Sep-07