ATSAM3S4CA-CU Atmel, ATSAM3S4CA-CU Datasheet - Page 375

• Manufacturer Part Number: ATSAM3S4CA-CU
• Description: IC MCU 32BIT 256KB FLASH 100BGA
• Manufacturer: Atmel
• Series: SAM3Sr

Specifications of ATSAM3S4CA-CU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 79
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 1.95 V
• Data Converters: A/D 16x10/12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LFBGA
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3S-EK
• Package: 100LFBGA
• Device Core: ARM Cortex M3
• Family Name: AT91
• Maximum Speed: 64 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 79
• Interface Type: I2C/I2S/SPI/UART/USART/USB
• On-chip Adc: 16-chx12-bit
• On-chip Dac: 2-chx12-bit
• Number Of Timers: 6
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

23.8.5
23.8.6
Table 23-2.
6500C–ATARM–8-Feb-11
Coded Value
setup [5:0]
pulse [6:0]
cycle [8:0]
Write Protected Registers
Coding Timing Parameters
Coding and Range of Timing Parameters
Number of Bits
To prevent any single software error that may corrupt SMC behavior, the registers listed below
can be write-protected by setting the WPEN bit in the SMC Write Protect Mode Register
(SMC_WPMR).
If a write access in a write-protected register is detected, then the WPVS flag in the SMC Write
Protect Status Register (SMC_WPSR) is set and the field WPVSRC indicates in which register
the write access has been attempted.
The WPVS flag is automatically reset after reading the SMC Write Protect Status Register
(SMC_WPSR).
List of the write-protected registers:
All timing parameters are defined for one chip select and are grouped together in one
SMC_REGISTER according to their type.
The SMC_SETUP register groups the definition of all setup parameters:
• NRD_SETUP, NCS_RD_SETUP, NWE_SETUP, NCS_WR_SETUP
The SMC_PULSE register groups the definition of all pulse parameters:
• NRD_PULSE, NCS_RD_PULSE, NWE_PULSE, NCS_WR_PULSE
The SMC_CYCLE register groups the definition of all cycle parameters:
• NRD_CYCLE, NWE_CYCLE
Table 23-2
•
•
•
•
6
7
9
Section 23.15.1 ”SMC Setup Register”
Section 23.15.2 ”SMC Pulse Register”
Section 23.15.3 ”SMC Cycle Register”
Section 23.15.4 ”SMC MODE Register”
shows how the timing parameters are coded and their permitted range.
256 x cycle[8:7] + cycle[6:0]
128 x setup[5] + setup[4:0]
256 x pulse[6] + pulse[5:0]
Effective Value
Coded Value
0 ≤ ≤ 127
0 ≤ ≤ 31
0 ≤ ≤ 63
SAM3S Preliminary
Permitted Range
Effective Value
0 ≤ ≤ 256+127
0 ≤ ≤ 512+127
0 ≤ ≤ 768+127
0 ≤ ≤ 128+31
0 ≤ ≤ 256+63
375