ATSAM3S4CA-CU Atmel, ATSAM3S4CA-CU Datasheet - Page 963

• Manufacturer Part Number: ATSAM3S4CA-CU
• Description: IC MCU 32BIT 256KB FLASH 100BGA
• Manufacturer: Atmel
• Series: SAM3Sr

Specifications of ATSAM3S4CA-CU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 79
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 1.95 V
• Data Converters: A/D 16x10/12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LFBGA
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3S-EK
• Package: 100LFBGA
• Device Core: ARM Cortex M3
• Family Name: AT91
• Maximum Speed: 64 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 79
• Interface Type: I2C/I2S/SPI/UART/USART/USB
• On-chip Adc: 16-chx12-bit
• On-chip Dac: 2-chx12-bit
• Number Of Timers: 6
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

38. Analog Comparator Controller (ACC)
38.1
38.2
6500C–ATARM–8-Feb-11
Description
Embedded Characteristics
The Analog Comparator Controller configures the Analog Comparator and generates an inter-
rupt according to the user settings. The analog comparator embeds 8 to 1 multiplexers on both
inputs.
The Analog Comparator compares two voltages and the result of this comparison gives a com-
pare output. The user can select a high-speed or low-power option. Additionally, the hysteresis
level, edge detection and polarity are configurable.
The ACC can also generate a compare event which can be used by the PWM.
Refer to
• One analog comparator
• High speed option vs. low power option
• Selectable input hysteresis:
• Minus input selection:
• Plus input selection:
• output selection:
• Interrupt on:
– 0, 20 mV, 50 mV
– DAC outputs
– Temperature Sensor
– ADVREF
– AD0 to AD3 ADC channels
– All analog inputs
– Internal signal
– external pin
– selectable inverter
– Rising edge, Falling edge, toggle
Figure 38-1 on page 964
for detailed schematics.
SAM3S Preliminary
963