AT91SAM7SE256-CU Atmel, AT91SAM7SE256-CU Datasheet - Page 555

• Manufacturer Part Number: AT91SAM7SE256-CU
• Description: IC ARM7 MCU FLASH 256K 144-LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7SE256-CU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: EBI/EMI, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 88
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFBGA
• Processor Series: AT91SAMx
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: EBI, SPI, TWI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, KSK-AT91SAM7S-PL, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM7SE-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• For Use With: AT91SAM7SE-EK - EVAL BOARD FOR AT91SAM7SEAT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: AT91SAM7SE256-CJ; AT91SAM7SE256-CJ

38. USB Device Port (UDP)
38.1
Table 38-1.
Note:
6222F–ATARM–14-Jan-11
Endpoint Number
0
1
2
3
4
5
6
7
Overview
1. The Dual-Bank function provides two banks for an endpoint. This feature is used for ping-pong mode.
USB Endpoint Description
Mnemonic
The USB Device Port (UDP) is compliant with the Universal Serial Bus (USB) V2.0 full-speed
device specification.
Each endpoint can be configured in one of several USB transfer types. It can be associated with
one or two banks of a dual-port RAM used to store the current data payload. If two banks are
used, one DPR bank is read or written by the processor, while the other is read or written by the
USB device peripheral. This feature is mandatory for isochronous endpoints. Thus the device
maintains the maximum bandwidth (1M bytes/s) by working with endpoints with two banks of
DPR.
Suspend and resume are automatically detected by the USB device, which notifies the proces-
sor by raising an interrupt. Depending on the product, an external signal can be used to send a
wake up to the USB host controller.
EP0
EP1
EP2
EP3
EP4
EP5
EP6
EP7
Dual-Bank
Yes
Yes
Yes
Yes
Yes
Yes
No
No
(1)
SAM7SE512/256/32 Preliminary
Max. Endpoint Size
64
64
64
64
64
64
64
8
Control/Bulk/Interrupt
Control/Bulk/Interrupt
Bulk/Iso/Interrupt
Bulk/Iso/Interrupt
Bulk/Iso/Interrupt
Bulk/Iso/Interrupt
Bulk/Iso/Interrupt
Bulk/Iso/Interrupt
Endpoint Type
555