AT91SAM7SE256-CU Atmel, AT91SAM7SE256-CU Datasheet - Page 620

• Manufacturer Part Number: AT91SAM7SE256-CU
• Description: IC ARM7 MCU FLASH 256K 144-LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7SE256-CU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: EBI/EMI, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 88
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFBGA
• Processor Series: AT91SAMx
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: EBI, SPI, TWI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, KSK-AT91SAM7S-PL, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM7SE-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• For Use With: AT91SAM7SE-EK - EVAL BOARD FOR AT91SAM7SEAT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: AT91SAM7SE256-CJ; AT91SAM7SE256-CJ

40.3.2
620
SAM7SE512/256/32 Preliminary
Peripheral Power Consumption in Active Mode
The figures shown below in
the power supplies..
Table 40-7.
Notes:
Table 40-8.
Mode
Active
(SAM7SE512/256/32)
Ultra Low Power
(SAM7SE512/256/32)
Peripheral
PIO Controller
USART
UDP
PWM
TWI
SPI
SSC
Timer Counter Channels
ARM7TDMI
System Peripherals (SAM7SE512/256/32)
1. “Flash is in standby mode”, means the Flash is not accessed at all.
2. Low power consumption figures stated above cannot be guaranteed when accessing the Flash
in Ultra Low Power mode. In order to meet given low power consumption figures, it is recom-
mended to either stop the processor or jump to SRAM.
Power Consumption for Different Modes
Power Consumption on V
(2)
Table 40-7
Conditions
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
ARM Core clock is 48 MHz.
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
Voltage regulator is in Low-power mode.
Brown Out Detector is de-activated.
Flash is in standby mode.
ARM Core in idle mode.
MCK @ 500 Hz.
Analog-to-Digital Converter de-activated.
All peripheral clocks de-activated.
USB transceiver disabled.
DDM and DDP pins must be left floating.
onto AMP1
onto AMP2
represent the power consumption typically measured on
DDCORE
(1)
Consumption (Typ)
(1)
170
265
12
30
24
15
18
35
6
7
Consumption
31
29
26
12
6222F–ATARM–14-Jan-11
µA/MHz
Unit
Unit
mA
µA