PIC18F6722-E/PT Microchip Technology, PIC18F6722-E/PT Datasheet - Page 151

• Manufacturer Part Number: PIC18F6722-E/PT
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,TQFP,64PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F6722-E/PT

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-TFQFP
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3936 B
• Interface Type: SPI, I2C, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 54
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM183032, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180020 - MODULE PLUG-IN HPC EXPL 18F87J11
• Lead Free Status / Rohs Status: Details

11.6
PORTF is an 8-bit wide, bidirectional port. The corre-
sponding Data Direction register is TRISF. Setting a
TRISF bit (= 1) will make the corresponding PORTF pin
an input (i.e., put the corresponding output driver in a
high-impedance mode). Clearing a TRISF bit (= 0) will
make the corresponding PORTF pin an output (i.e., put
the contents of the output latch on the selected pin).
The Data Latch register (LATF) is also memory
mapped. Read-modify-write operations on the LATF
register read and write the latched output value for
PORTF.
All pins on PORTF are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
PORTF is multiplexed with several analog peripheral
functions, including the A/D converter and comparator
inputs, as well as the comparator outputs. Pins RF1
through RF2 may be used as comparator inputs or
outputs by setting the appropriate bits in the CMCON
register. To use RF<6:0:> as digital inputs, it is
necessary to turn off the A/D inputs.
© 2008 Microchip Technology Inc.
PORTF, LATF and TRISF Registers
EXAMPLE 11-6:
PIC18F8722 FAMILY
CLRF
CLRF
MOVLW
MOVWF
MOVLW
MOVWF
Note 1: On a Power-on Reset, the RF<6:0> pins
2: To configure PORTF as digital I/O, set the
PORTF
LATF
0x0F
ADCON1 ; Set PORTF as digital I/O
0xCF
TRISF
are configured as analog inputs and read
as ‘0’.
ADCON1 register.
; Initialize PORTF by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
;
; Value used to
; initialize data
; direction
; Set RF3:RF0 as inputs
; RF5:RF4 as outputs
; RF7:RF6 as inputs
INITIALIZING PORTF
DS39646C-page 149