PIC18F6722-E/PT Microchip Technology, PIC18F6722-E/PT Datasheet - Page 199

• Manufacturer Part Number: PIC18F6722-E/PT
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,TQFP,64PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F6722-E/PT

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-TFQFP
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3936 B
• Interface Type: SPI, I2C, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 54
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM183032, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180020 - MODULE PLUG-IN HPC EXPL 18F87J11
• Lead Free Status / Rohs Status: Details

18.4.5
In Full-Bridge Output mode, four pins are used as
outputs; however, only two outputs are active at a time.
In the Forward mode, pin P1A is continuously active
and pin P1D is modulated. In the Reverse mode, pin
P1C is continuously active and pin P1B is modulated.
These are illustrated in Figure 18-6.
FIGURE 18-6:
© 2008 Microchip Technology Inc.
Note 1: At this time, the TMR2 register is equal to the PR2 register.
Note
Forward Mode
Reverse Mode
2: Output signal is shown as active-high.
FULL-BRIDGE MODE
P1A
P1B
P1C
P1D
P1A
P1B
P1C
P1D
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
FULL-BRIDGE PWM OUTPUT
(1)
(1)
Duty Cycle
Duty Cycle
Period
Period
P1A, P1B, P1C and P1D outputs are multiplexed with
the PORTC<2>, PORTE<6:5> and PORTG<4> data
latches. Alternatively, P1B and P1C can be assigned to
PORTH<7> and PORTH<6>, respectively, by program-
ming the ECCPMX Configuration bit to ‘0’. See
Table 18-1, Table 18-2 and Table 18-3 for more infor-
mation. The associated bits must be cleared to make
the P1A, P1B, P1C and P1D pins outputs.
PIC18F8722 FAMILY
(1)
(1)
DS39646C-page 197