CQM1-CIF01 Omron, CQM1-CIF01 Datasheet - Page 82

• Manufacturer Part Number: CQM1-CIF01
• Description: PERIPHERAL CABLE FOR NEC COMP.
• Manufacturer: Omron

Specifications of CQM1-CIF01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Editing Sequence Settings
Entering Settings Using the List Numbers
Clearing to Default
Settings
To Copy Axes
4-4
4-4-1
Editing Sequence Settings
Sequence Editing Window
1,2,3...
1,2,3...
1,2,3...
1. In the Setting Editing Window, enter directly the setting to be set.
2. Press the Enter Key or use the Up or Down Keys to set the setting.
Use the following procedure to clear the axis settings to their default values.
(Refer to 4-2-4 Clearing Settings for details.)
1. In the Parameter Setting Editing Window, either select Edit - Defaults Set-
2. Select the axis whose settings are to be cleared to the default values.
3. Click the OK Button.
4. A dialog box will be displayed asking if the settings should be returned to
For 2-axis and 4-axis Position Control Units, data can be copied from one axis
to another axis by selecting the source and destination axes. (Refer to 4-2-5
Copying Axis Settings for details.)
1. Select Edit - Copy Axis.
2. Under From and To, select the axes to be copied from and to respectively.
3. Click the OK Button.
On the project tree, either double-click Edit Sequence, or select it and press
the Enter Key.
For single axis Position Control Units, only the Table 1 Tab will be displayed;
for 2-axis Position Control Units, only the Table 1 and Table 2 Tabs will be dis-
played.
Example: The following will be displayed as the 4-axis Position Control Unit
sequence Setting Editing Window.
Table Tabs
ting, or right-click and select Defaults Setting from the pop-up menu.
their default values. Click the OK Button.
Section 4-4
61