CQM1-CIF01 Omron, CQM1-CIF01 Datasheet - Page 87

• Manufacturer Part Number: CQM1-CIF01
• Description: PERIPHERAL CABLE FOR NEC COMP.
• Manufacturer: Omron

Specifications of CQM1-CIF01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

66
4-8
4-8-1
4-8-2
To Clear to Default
Settings
To Copy Axes
Editing Zone Settings
Editing Zone Settings
Zone Setting Window
Editing Zone Settings
1,2,3...
1,2,3...
On the project tree, either double-click Edit Zone, or select it and press the
Enter Key.
Example: The following will be displayed as the 4-axis Position Control Unit
Zone Setting Editing Window.
The zone setting range is as follows.
Pulse: C0000001 to 3FFFFFFF Hex ( ± 1,073,741,823) (pulse)
mm or inches: Above set value × pulse rate
Example: The following will be displayed as the Zone Setting Editing Window
(hexadecimal display shown).
Use the following procedure to clear specific setting to their default values.
(Refer to 4-2-4 Clearing Settings for details.)
1. In the Zone Setting Editing Window, select the settings to be cleared to
2. Select Edit - Clear.
For 2-axis and 4-axis Position Control Units, data can be copied from one axis
to another axis by selecting the source and destination axes. (Refer to 4-2-5
Copying Axis Settings for details.)
1. Select Edit - Copy Axis.
2. Under From and To, select the axes to be copied from and to respectively.
3. Click the OK Button.
their default values, or designate the range by clicking and dragging.
Section 4-8