CQM1-CIF01 Omron, CQM1-CIF01 Datasheet - Page 86

• Manufacturer Part Number: CQM1-CIF01
• Description: PERIPHERAL CABLE FOR NEC COMP.
• Manufacturer: Omron

Specifications of CQM1-CIF01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Editing Dwell Time Settings
4-7
4-7-1
4-7-2
To Clear to Default
Settings
To Copy Axes
Editing Dwell Time Settings
Dwell Time Setting Window
Editing Dwell Time Settings
1,2,3...
1,2,3...
On the project tree, either double-click Edit Dwell Time, or select it and press
the Enter Key.
Example: The following will be displayed as the 4-axis Position Control Unit
Dwell Time Setting Editing Window.
The dwell time setting range is from 0000 to 03E7 Hex (0.00 to 0.99) (s).
Refer to 4-2-2 Editing Settings for editing methods.
Example: The following will be displayed as the Dwell Time Setting Editing
Window.
Use the following procedure to clear specific settings to their default values.
(Refer to 4-2-4 Clearing Settings for details.)
1. In the Dwell Time Setting Editing Window, select the settings to be cleared
2. Select Edit - Clear.
For 2-axis and 4-axis Position Control Units, data can be copied from one axis
to another axis by selecting the source and destination axes. (Refer to 4-2-5
Copying Axis Settings for details.)
1. Select Edit - Copy Axis.
2. Under From and To, select the axes to be copied from and to respectively.
3. Click the OK Button.
to their default values, or designate the range by clicking and dragging.
Section 4-7
65