ADUC7032BSTZ-8L-RL Analog Devices Inc, ADUC7032BSTZ-8L-RL Datasheet - Page 110

• Manufacturer Part Number: ADUC7032BSTZ-8L-RL
• Description: IC,Battery Management,QFP,48PIN,PLASTIC
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7032BSTZ-8L-RL

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 20.48MHz
• Connectivity: LIN, SPI, UART/USART
• Peripherals: POR, PSM, Temp Sensor, WDT
• Number Of I /o: 9
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 18 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Compliant

ADuC7032-8L
ADuC7032-8L ON-CHIP DIAGNOSTICS
The ADuC7032-8L integrates multiple diagnostic support
circuits on-chip. These circuits allow the device to test core
digital functionality, and analog front-end and high voltage I/O
ports in-circuit.
ADC DIAGNOSTICS
Internal Test Voltage
The current channel can be configured to convert on an
internal 8.3 mV test voltage. On any gain range, the result
should be within ±2% of the expected result.
Internal Short Mode
The current and voltage input channels can also be shorted
internally. Converting on the internal short allows an
assessment of the internal ADC noise.
Rev.0 | Page 110 of 116
Internal Current Sources
Internal current sources can also be enabled on both current
and temperature channels. These current sources can be used
to determine external short-circuit or open-circuit conditions
in both external shunt or temperature sensor configurations.
HIGH VOLTAGE I/O DIAGNOSTICS
High Voltage I/O Readback
All high voltage I/O pins are supported with readback capa-
bility, which allows the detection of external short conditions.
High Voltage Current Detection
All high voltage I/O pins also have a high current detection
capability, allowing high-side connections to VBAT to be
detected and controlled.